-
Anonymous users2024-01-24[Look at the size of the size].
When purchasing panel furniture, it is necessary to look at the size of the furniture, the main size of the furniture, and the national standards have specified requirements. For example:
The wardrobe stipulates that the depth of the space in the hanging wardrobe should be 530 mm.
Table furniture is specified in height of 680-760 mm.
The clearance height between the bookcase floors should be 230-310 mm.
Look at the quality of the plate].
When buying panel furniture, it is necessary to look at the quality of the panel:
Carefully check whether the glue is evenly applied on the decorative parts of the edges and surfaces of the plate.
Whether the bond is firm and whether the trimming is smooth and smooth.
Whether the end face of the visible parts such as the side panel, door panel, drawer panel, etc. is edge-banded.
There are no signs of bonding on the well-decorated edge of the panel.
The assembly combination mainly depends on whether the tongue and groove at the drilling hole is delicate and neat, and whether the connector is firm after installation.
Is there a gap between the T-shaped seam after the plane is connected with the end face, and there is no loosening phenomenon when pushed by hand.
Look at the veneer of the edge banding].
When buying panel furniture, look at the veneer of the edge banding:
Look carefully for flaws, the quality of edge banding greatly affects the quality of furniture.
First of all, the advantages and disadvantages of the edge banding material, and secondly, we should pay attention to whether the edge banding is uneven and warped.
A good edge banding should fit perfectly into the entire board.
Look at the hardware connectors].
When purchasing panel furniture, you need hardware connectors, because panel furniture can be disassembled and assembled at will, so the quality of hardware connectors is very important
Hardware connectors are the most intuitive quality standards, good hardware should be opened and closed freely, no noise, and no peeling of the surface plating.
The hardware of some high-end panel furniture is imported, and foreign language logos can be found on it.
Metal parts are required to be dexterous, smooth, and have good surface electroplating treatment, without rust, burrs, etc., and the precision of the matching parts should be high.
The plastic parts should be beautiful in shape, bright in color, and the strength and elasticity of the parts in use should not be too thin.
The opening connector requires flexible rotation, so that the furniture will be smooth and easy to open and use, and there is no frictional sound.
"1. Before buying furniture, you should first measure the size of the space (length, width, height) in the living room >>>More
The top 10 brands are selected through various conditions, and the strength of each brand should be seen according to the ranking.
The 10 major home furnishing brands circulating on the Internet are only relatively speaking, It is to do it for a long time, and the outlets are more open, which is not suitable for your villa needs.
The living room is a living area, with plenty of light and good air circulation. Moreover, the place used to entertain guests is too dimly arranged, which is not conducive to communication and entertainment, and will give people psychological pressure.
Interior doors are generally divided into: bedroom doors, study doors, kitchen doors, and bathrooms. >>>More