Consult an expert The toilet sewer pipe opening in the new building which will be used to install f

Updated on Bathroom 2024-06-23
3 answers
  1. Anonymous users2024-01-24

    The new house should be 15 cm to 20 cm higher and should not be lower than the waterproof layer, which can easily lead to future waterproofing failure.

  2. Anonymous users2024-01-23

    The requirements should be higher than the waterproof layer and higher than the reserved construction surface layer.

    But if it's low, it's also very easy to deal with, and you can do some waterproofing around the mouth and add a floor drain.

  3. Anonymous users2024-01-22

    Of course, it is higher than the waterproof layer, and there is still work on the waterproof layer, and if it is low, what if there is a leak between the waterproof layer and the nozzle?

Related questions
The sewer pipes in the new building are not used much, there is no toilet, and cigarette butts will
2 answers2024-06-23

It may be burned, but there is usually soil on it, so it's fine.

The bathroom was changed to a wardrobe, and I forgot to block the sewer pipe opening, will there be
4 answers2024-06-23

In the spring, it is changed to a cloakroom, and if the sewer mouth inside is very tightly blocked, no insects will crawl out.

Should the bathroom be blocked as a room sewer pipe?
2 answers2024-06-23

Block it, but don't block it in case you need to use it later.

What should I do if the sewer pipe in the bathroom of the building is aging and broken?
2 answers2024-06-23

1. Conservative treatment: clean the joint surface of the leakage part, and use the plugging spirit to plug the leakage; >>>More

What to do if the cast iron sewer pipe on the top of the bathroom in the building is aging and broke
1 answers2024-06-23

1. Conservative treatment: clean the joint surface of the leakage part, and use the plugging spirit to plug the leakage; >>>More