What should I do if the bathroom is made of a waterproof layer, and the ground is higher than the li

1. All are separated by L-shaped passage stones, which is a common situation.

Note: COMBINE THE CEMENT MORTAR TO BE PREPARED WITH WATERPROOFING AGENT, 5MM HIGHER THAN THE FLOOR TILE (DO CHAMFERING), LEAVE A 2MM GAP WITH THE FLOOR TILE, TEMPORARILY SEAL IT WITH COLOR SEPARATION PAPER, AFTER COMPLETION, TEAR OFF THE COLOR SEPARATION PAPER AND SEAL IT WITH TRANSPARENT GLASS GLUE, INCLUDING THE LOWER END OF THE DOOR FRAME.

Usually use the threshold stone to press, so that you can separate the bathroom from other areas, if the living room is paved with floor tiles, there is no need to think too much, the worker will put the cushion high point to balance both sides, if the composite floor is laid, it is recommended to make a floor first, so as to ensure that the floor is very flat when the floor is paved, but also to solve the problem of the height difference between the two rooms.

If the floor of the bathroom is higher than the living room, to prevent sewage from flowing into other rooms, it is necessary to add a water stop strip, in addition to adding a water stop strip.

There are also a few ways to govern and know a way to save money and time:

1. Always check whether the drain is blocked, and dredge it in time if there is.

2. If the water supply pressure of the building is too large, then it is necessary to control the main valve of the bathroom not to open too large, so as to avoid water leakage.

3. To separate bathing and washing, the wall should be at least about 1.8 meters, which can effectively prevent the phenomenon of backflow water.

Question: Rural housing, a large living room with a bathroom, the toilet and the living room are together, the bathroom is relatively high, how to install the door.

Rural housing, a large living room and a bathroom, the bathroom and the living room are together, the bathroom is relatively high, how to install the door.

Answer: You can consider making an overall shape on this wall, including the bathroom door design, so that the bathroom door becomes an invisible door, the door opens inside, and a small "door closer" is installed behind the door. This "door closer" is not a door closer in the true sense of the word, but an accessory with a door closer function, which is very cheap.

Don't worry, the master of tiles will help you solve the relationship between the height of the bathroom tiles and the height of the living room. They usually raise the height of the living room, so you can rest assured.

Make a threshold to prevent water from entering the hall.

1. Make a relatively high bridge barrier at the interface between the bathroom and the living room, just like a threshold.