Only the bathroom socket on my home appliance meter box jumped, and I couldn t push it up, putting a

Updated on Bathroom 2024-06-24
7 answers
  1. Anonymous users2024-01-24

    1. Determine whether there is a short circuit first, if there is no short circuit, there are two methods:

    1.If it is a leak warranty, please press the reset button first, and then close;

    2.If it is an air circuit breaker (air open), press the blade down to the bottom first, and then close it upwards.

  2. Anonymous users2024-01-23

    If the wire inside the concealed conduit is damaged and leakage, the wire can be replaced, if you don't want to replace the wire, you can switch the position of the live wire and the neutral wire!

  3. Anonymous users2024-01-22

    There's a reset button on the empty open, and when you trip, he'll jump out, and he'll press it to try it

  4. Anonymous users2024-01-21

    Do you have any other electrical appliances in your bathroom, such as washing machines, water pumps, etc., which are more likely to be short-circuited.

  5. Anonymous users2024-01-20

    Let's see if the empty open is broken, if it is good, there are two possibilities1The main line is short-circuited, 2, the socket is carbonized or there is water.

  6. Anonymous users2024-01-19

    The wires are short-circuited, check them carefully.

  7. Anonymous users2024-01-18

    There's a reset button, did you press it?

Related questions
1 answers2024-06-24

The power of the bathroom is 6KW, the current is about 25 to 28A, and the air opening of 32A needs to be used, and the main switch should add the power of other electrical equipment at home, but you do not have the parameters of other electrical appliances at home, it is recommended to choose 50A

4 answers2024-06-24

The bathroom meter box decoration painting can be painted with a gourd, which has no special meaning and no problem. Personally, I don't think there's a problem.

3 answers2024-06-24

It is very likely that one of the two wires on the lamp head is loose and comes out and hits the other wire, or the water in the lamp head is too wet to cause a short circuit. You can unscrew the lamp head cover and find the cause to rule it out. >>>More

6 answers2024-06-24

First of all, your washing machine is not as simple as photocapacitor damage, removing the ground wire and not tripping means that the washing machine has leakage. Then there is the landlord must figure out the protection line and the working zero line, if the line is true, the two protection line contact should not trip, the zero line and the protection line contact will trip.

2 answers2024-06-24

Can be loaded.

Electric water heaters are hung on the wall, saving floor space. >>>More