Decoration is imminent, how to choose a toilet?

When choosing a toilet for home decoration, it is not said that the more expensive the price and the bigger the brand, the better, you must choose the right one for your own family, how to choose the right toilet for you? There are many details to pay attention to, and there are a few points for reference:

Clause. First, the pit distance, the choice of the toilet pit distance is very critical, if the choice is not correct, the toilet may not fit, or the toilet from the wall has a gap, no matter what, it is very unsightly. THE TOILET PIT DISTANCE IN THE BATHROOM IS GENERALLY DIVIDED INTO 300MM, 350MM, 400MM, AND 450MM. How to measure the pit distance, the distance from the wall to the center of the toilet is the pit distance, pay attention.

Be sure to stick the wall tiles to the center of the toilet. USUALLY THE TOILET MOUTH SIZE IS 110 SEWER PIPE, AND ITS CENTER POSITION IS 55CM.

Clause. Second, energy saving, some friends in order to save a few hundred yuan of toilet money, do not consider its energy-saving water consumption, we must flush after using the toilet, a good toilet will take into account energy saving, flushing will be more economical than ordinary toilets, long-term use, the water cost saved can buy a few good toilets. Therefore, in the long run, it is important to consider its energy savings.

Clause. Third, the weight, the weight of a toilet is about 50 to 100 pounds, the weight of a good quality toilet will be heavier, and the heavier toilet will be more exquisite in workmanship.

Clause. Fourth, glaze, a good toilet glaze gloss will be brighter, under the light of the light clean and shining, ordinary toilet looks dark, as if stained with dust, no matter how to clean can not be clean.

Clause. Fifth, the flushing method, the toilet has.

There are several ways to flush, whirlpool, whirlpool siphon and jet, and I personally recommend that the toilet can be chosen.

A whirlpool siphon toilet will drain the sewage more effectively.

1. Toilets are divided into straight flush type and siphon type, let's take a look at their respective advantages and disadvantages.

Flush toilets.

Advantages: The vortex effect has a large adsorption force, and it is easy to wash down when there is a lot of dirt.

Disadvantages: The water pressure is small, which is easier to clog than the jet type, and at the same time, due to the backflush relationship of the direct suction type, the toilet water is sometimes not clean.

Siphon toilets.

Advantages: It is not easy to block, the water pressure is large, and the inner wall and stagnant water are relatively clean, disadvantages: If it is a one-way jet, it cannot form a vortex, and sometimes something with large buoyancy. Or if there is more dirt, it will rush west.

2. The heavier the weight of the toilet, the better, which means that it is dense and stronger. You can lift the toilet tank and try it, the heavier the tank, the heavier the toilet of course, there is no doubt about it. The denser the toilet bowl is, the higher the finish of the toilet bowl, and the better the quality of the toilet bowl.

3. The toilet is an object that needs to be used for a long time, so the water-saving function is a very important part of the assessment, usually the flushing volume is less than 6 liters, then this toilet is water-saving.

4. Look at the sewage outlet, the larger the sewage outlet, the stronger the sewage discharge capacity, if the sewage outlet is small, it is possible that the toilet is blocked, and the size of the sewage outlet is to reach out to the sewage outlet to try the size, and pay attention to the glaze light of the façade is not smooth, if it is not smooth, it is easy to hang dirt.

5. The quality of water parts is a prerequisite for the durability of the toilet. To look at the ID card of the toilet first, there is a barcode behind the qualified toilet, and the water tank cover has a "manual inspection stamp", "year of appearance", "model of the toilet", "year of manufacture", and there is a "A" grade standard on it, remember that only two "AA" are high-quality products.

6. There are direct flush type, vortex siphon type, and jet siphon type. The direct flush water injection is about 6 liters, and the sewage discharge capacity is strong, but the sound is loud when flushing; The vortex siphon type consumes a lot of water at one time, but has a good silent effect; Jet siphon type has the advantages of direct flushing and whirlpool, which can not only quickly flush away dirt, but also have a good silent effect, and can also play a role in saving water.

7. Then check whether the water tank is leaking, put the pigment in the water tank to see if there is any color flowing out. If there is a color leak in the toilet, it must be a water leak.

How to choose a good toilet.

1. First of all, when we buy a toilet, we must first determine the distance between the size of the toilet and the center of the drain, so as to determine the size of the toilet we want to buy, and the toilet is also divided into front and back water. If the center of the sewer in your home is far from the wall, it is recommended to buy a front flush toilet.

2. The weight of the toilet, the weight of the toilet bowl with relatively high quality will not be too light. The weight of a general toilet is about 15 catties and 35 catties. Therefore, when buying a toilet, you must not listen to the fool of the shopping guide, saying that the lighter the weight of the toilet, the better the quality, the very light toilet its interior is ceramic hollow, and it may cut corners in the production.

3. When buying a toilet, it is necessary to look at the quality problem, generally speaking, the quality of the tiles of the better toilet is more delicate, and it is also very good to clean up. Even if you use it for a long time, it won't leave too much dirt and will still be as clean as ever. However, those toilets with poor tile quality, after use, dirty things are easier to get into the cracks and difficult to clean, and those with poor quality will become very dirty after long-term use.

4. There is also the height of the toilet water seal, many friends will report that their toilet will be smelly, and this situation is generally due to the insufficient position of the toilet water seal. Generally speaking, the normal toilet water seal position should generally be reserved for a height of more than five centimeters, if it is less than five centimeters, it is easy to return to odor.

In fact, there are many strategies for choosing a toilet now, just check it on the Internet, but many require you to touch whether the glaze is smooth, whether the water button is rebounding, and whether the toilet is heavy, these are the methods of laymen.

The toilet still depends on the brand, for example, the ceramic body of Wrigley is very good, in fact, each factory has OEM processing, the key is to find cost-effective products. The first is that the ceramic body is safe and will not explode on the spot, and the second is smooth, and the glaze of the good ceramic body is reflective cyan, not yellow, so that the flush will not hang stolen goods.

Secondly, whether you buy a smart toilet or a non-smart one, it is recommended to bring a water tank, because the water pressure of some real estate may not be high enough, and the flushing force is not so big, recently my sister's family bought a toilet, called Yougu, in fact, it is quite good, in terms of material price, it is not worse than Jiumu and Wrigley, but it is not as good as Toto Kohler, but after all, the price is there.

Well, you get what you pay for, and good quality is more expensive, but it's still worth it for durability.

The toilet must be well chosen. Some are cheaper. After a long time, he will be annoyed, the smell of the underground is terrible, rather than changing it again, it is better to choose it directly from the beginning.

Toilet flushing, choose a relatively large flushing force. There are three types of flush structures. The first is a waterfall design, which is sprayed with water at multiple points through small holes.

This kind is the most ordinary. The second is the 2D flush structure design, which is obliquely flushed by two streams of water to form a spiral water. The third is the 3D flush structure design, which is made by three streams of water and flushes obliquely into a spiral to discharge water.

This kind of is better now. The brand is self-determined.