-
Anonymous users2024-01-24Turn off all kitchen appliances, unplug and push the electric switch, if it still trips (or there is a spark when pushed, there should be no spark if there is no connection of electrical equipment), it means that the kitchen circuit socket is damaged, there is a problem in the middle of the line (including buried line), check and eliminate; If there is no tripping phenomenon, it means that the kitchen appliances have leakage and wiring, and the connection of one appliance to another, use the elimination method to find the fault location.
-
Anonymous users2024-01-23It should be a short circuit, you check the line to see if the wire is aging, whether there is a meeting, whether there is any scorching!
Hello; Replace this empty open, the reason is that the internal structure of the empty open is out of order, resulting in the failure of the locking function, you change a slightly larger air open to try it, if it is a leakage protector, there is no need to change the big one, the same model can, I hope it can help you.
It is possible that the power exceeds the current limit of the leakage warrant, and the leakage warrant is replaced with a larger one.
First of all, you should replace this trip switch with a new one, change the switch and try to send power, if the switch is sent to the switch, it means that it is the problem of the switch, if the switch is still not sent, it is necessary to unplug the plug of all the electrical appliances within the range of the switch, and then send the power to see if the switch can be sent, if the switch is sent, and then try to plug in the plug just pulled one by one, and find that the electrical switch is tripped during the operation, which means that the fault is the electrical fault!
The load is a bit tight, such as when the refrigerator is started, and it is difficult to close, but if it is so long. It can be considered that there are other problems.
The quality of the switch is not good, and the capacity is not very sufficient.