What should I do if there is water seeping on the side of the mop pool on the balcony? How to make u

Hello! Your problem should be solvable here:

First, chisel the cement around the pipe, take out the pipe, then chisel the hole around it slightly larger and smoother, and then bury it in the hole with a section of PVC pipe, this PVC pipe should match the size of the drainage pipe, and then put the drainage pipe on the PVC pipe; When burying PVC pipes, water is not leaking - this is a special material for plugging leaks, the price is about 20 yuan a pack, and you can operate according to the method on the instruction manual. Water leakage should be applied around the hole, so that the PVC pipe is not leaky all around, and try to be as deep as possible, so that it will be firmer. The water does not leak will solidify quickly, the action must be fast when operating, it can be divided into two times, the first time try to squeeze the water into the hole without leaking, and the second time to make the surface smooth and good-looking; When the plastic tube is set, glass glue can be applied to the periphery of the tube, and the glass glue has the effect of sealing.

After this treatment, it can be used for many years.

Judging from the picture, your pool drainage connection should have been silicone (commonly known as glass glue) before

Construction tools and materials: a bottle of silicone with a market price of about 10 yuan; The market price is about 15 yuan, and the prices vary from place to place.

Step 1: First use scissors to cut off about 2mm at the front end of the silicone (the end with threads), then screw on the cone head, and cut off a section of the cone head appropriately (if you really don't know how to install the silicone gun, you can ask the store to help you install it first when you buy it at the grocery store) Put the silicone bottle into the cavity, and pinch the handle when using;

Step 2: Clean up the original silica gel, clean up some loose sand cement blocks, and keep the surface clean and tidy, non-greasy and not damp;

Step 3: Put the water pipe into the hole (depending on the situation), then squeeze the silicone along the perimeter of the pipe, and fill the surrounding area.

Note: Do not use it within 24 hours, and the leak-proof effect can be achieved after the structure is solidified.

Hope it helps.

The pool drainage interface is made of silicone (commonly known as: glass glue).

Construction tools and materials: a bottle of silicone with a market price of about 10 yuan; The market price is about 15 yuan, and the prices vary from place to place.

Step 1: First use scissors to cut off about 2mm at the front end of the silicone (the end with threads), then screw on the cone head, and cut off a section of the cone head appropriately (if you really don't know how to install silicone Q, you can ask the store to help you install it first when you buy it at the grocery store) Put the silicone bottle into the cavity, and pinch the handle when using;

Step 2: Clean up the original silica gel, clean up some loose sand cement blocks, and keep the surface clean and tidy, non-greasy and not damp;

Step 3: Put the water pipe into the hole (the depth depends on the situation), and then squeeze the silicone along the four sides of the pipe and fill the surrounding area.

Note: Do not use it within 24 hours, and the leak-proof effect can be achieved after the structure is solidified.

If the mop pool pipe is rotten and leaking:

First, chisel the cement around the pipe, take out the pipe, then chisel the hole around it slightly larger and smoother, and then bury it in the hole with a section of PVC pipe, this PVC pipe should match the size of the drainage pipe, and then put the drainage pipe on the PVC pipe; When burying PVC pipes, water is not leaking - this is a special material for plugging leaks, the price is about 20 yuan a pack, and you can operate according to the method on the instruction manual. Water leakage should be applied around the hole, so that the PVC pipe is not leaky all around, and try to be as deep as possible, so that it will be firmer. The water does not leak will solidify quickly, the action must be fast when operating, it can be divided into two times, the first time try to squeeze the water into the hole without leaking, and the second time to make the surface smooth and good-looking; When the plastic tube is set, glass glue can be applied to the periphery of the tube, and the glass glue has the effect of sealing.