-
Anonymous users2024-01-24Wait for me to teach you!
The most convenient method is to fill with glass glue and cement, which must be effective, and it will not seep water for at least 10 years!
Don't just use cement, it will definitely crack again, and it will be a matter of a short time, or if it is more complicated, use brazing!
-
Anonymous users2024-01-23It can also be solved: use a piece of waste car tire skin about 5mm thick to cover the crack and tie it tightly with iron wire, remember, the tire skin should be large enough, and it should be able to tie 3 or 4 turns of wire on it.
-
Anonymous users2024-01-22Stick it with any kind of super glue, because the sewer pipe is not pressurized. Generally, there will be no leakage after sticking, and the other problems have been said above, if you want to save money, please rest assured that it will be sticky!
-
Anonymous users2024-01-21It should be exchangeable.
You can go to the home improvement company and ask some professional masters to help you deal with it.
-
Anonymous users2024-01-20Glass glue? I'm not afraid of poisoning. If you don't hit that, it's also chronic.
-
Anonymous users2024-01-19How about the glue on the moon?
First of all, it is necessary to find out whether the crack is still developing. If stabilized, then process. Two-millimeter cracks should be pasted with fiberglass mesh first, and then plastered and pasted with wall tiles.
This is more troublesome, and the general pit spacing should be 300 or 400mm; There are also non-standard sizes, and a model is AB1218 seen on Taobao, with a pit spacing of 250. >>>More
There is no pressure in the sewer pipe, so how to break it is not bad, you can fix it first, and then seal the crack with glass glue, etc., but this method is the best way, and it is best to replace it with a new one.
1. The kitchen sewer pipe is cracked and needs to be repaired by a plumber. >>>More
Treatment method you can first remove the rust of the skin, with glue gloves, with pure cement on the cast iron pipe, and then use the mesh cloth to wrap on the cement, and then use cement to continue to wipe on the mesh cloth, and when the cement wants to collect sweat, wipe it smooth with your hands, and then paint it with paint after drying.