Put the water in the kitchen slowly, there is no problem, but if you put too much, it will overflow.

Updated on Kitchen 2024-06-28
1 answers
  1. Anonymous users2024-01-24

    The connection between the sewer hose and the pipe should have been sealed. There are generally two reasons for slow launching: 1

    The sewer pipe is blocked by oil or debris, you open the place that can be opened and clean it, the pipe is poked with iron bars and the like, and the boiling water is not much effective with the dredging agent, so you still have to poke it directly. . . 2.The slope of the sewer pipe is too small, see if you can adjust it.

Related questions
4 answers2024-06-28

No problem, just keep it clean and tidy, and there is no clutter and corruption.

2 answers2024-06-28

No problem! There are many water joints in the kitchen, so there are many elbows! Pressure water is not affected by elbow water!

1 answers2024-06-28

There is no problem with the pipe, it may be that there is a leak in the buried water pipe joint , which needs to be tested to determine that there is a problem with the water pipe connection; The waterproofing is done, but it does not mean that the waterproofing is qualified , the waterproof layer may crack, to judge whether the waterproof is qualified, it is necessary to do a water storage test. >>>More

2 answers2024-06-28

Gas water heaters are not easy to use, and the water flow rate should be considered first. >>>More

7 answers2024-06-28

The kitchen is equipped with a curtain, and the oil smoke can be blocked. However, the curtain should be cleaned frequently, otherwise the fumes will be ugly on the curtain, and it will be difficult to clean after a long time. >>>More