What are the steps of gypsum board ceiling?

The ceiling is made of gypsum board and keel, generally with wood keel and light steel keel. If you use wooden boards to make a suspended ceiling, because the wooden board is easy to deform, it will also cause the unevenness of the top surface, and it will be easy to change color after brushing latex paint on the wooden board.

Basic steps for suspended ceilings:

1. Lay a good horizontal line.

2. Install the keel (wooden keel or light steel keel).

3. Install gypsum board.

4. The gypsum board is fixed with self-tapping screws, and the spacing between the screws is generally about 20 cm, not too thin; Between the plasterboard and the drywall, there must be a gap of 3 5mm.

5. After the installation of gypsum board is completed, the joints can be stirred into putty with gypsum powder and glue, or buy special gypsum board caulking putty; When caulking, the batch scraping of putty must be smooth; After the putty is dry, apply white latex to the gaps, and put the bandage on it, and after it dries, you can use talcum powder putty (or finished putty powder) to level it. This kind of putty leveling generally needs to be done twice, and then sanded with sand peels.

In this way, you can then roll the latex paint.

The gypsum board produced in China mainly includes: paper gypsum board, decorative gypsum board, gypsum hollow strip board, fiber gypsum board, gypsum sound-absorbing board, positioning point gypsum board, etc.

At present, the common ceiling materials include light steel keel gypsum board ceiling, T-shaped keel mineral wool board ceiling, aluminum gusset ceiling (including integrated ceiling), plastic gusset ceiling, and aluminum grating ceiling.

Measuring ruler, planning, budgeting raw materials, and prices, invoicing, playing levels, hanging keels or wooden strips, cutting boards, and putting boards. Make paint.

Ceilings are equipped with professional masters, you don't need to worry, I saw the integrated ceiling of AIA, know that there is a door-to-door design service on the choice of their ceiling is very beautiful, friends are said to look at the atmosphere, the quality is also very good, there has been no small problem.

The ceiling is made of gypsum board and keel as a good du, and there are generally wooden keels and light steel keels. If you use wooden boards to make the ceiling, because the wooden board is easy to deform, it will also cause the unevenness of the top surface, and it will be easy to change color after brushing latex paint on the wooden board.

Basic steps for suspended ceilings:

1. Lay a good horizontal line.

2. Install the keel (wooden keel or light steel keel).

3. Install gypsum board.

4. The gypsum board is fixed with self-tapping screws, and the spacing between the screws is generally about 20 cm, not too thin; Between the plasterboard and the drywall, there must be a gap of 3 5mm.

5. After the installation of gypsum board is completed, the joints can be stirred into putty with gypsum powder and glue, or buy special gypsum board caulking putty; When caulking, the batch scraping of putty must be smooth; After the putty is dry, apply white latex to the gaps, and put the bandage on it, and after it dries, you can use talcum powder putty (or finished putty powder) to level it. This kind of putty leveling generally needs to be done twice, and then sanded with sand peels.

In this way, you can then roll the latex paint.

1.The gypsum board system of China's production mainly includes: paper gypsum board

Decorative gypsum board, gypsum hollow strip board, fiber gypsum board, gypsum sound-absorbing board, positioning point gypsum board, etc.

2.At present, the common ceiling materials include light steel keel gypsum board ceiling, T-shaped keel mineral wool board ceiling, aluminum gusset ceiling (including integrated ceiling), plastic gusset ceiling, and aluminum grating ceiling.