Waterproofing the corners of the bathroom?

In order to reduce the economic losses that may occur in the future, it is best to find a waterproofing and plugging company to do the waterproof layer for you, and do the waterproof construction plan, and the contract is the legal basis for backup.

The specific steps are:

1. Stop all possible water splashing operations in the bathroom.

2. Remove all materials on the bathroom wall and expose the base layer.

3. Let the wall dry for 4 to 5 days (the purpose is to dry the water vapor in the wall).

4. Treat the base surface of the base layer flat, firm and clean, and paint the cement-based "permeable crystalline" waterproof coating.

5. The shower area is painted with centimeters high, other walls are painted with centimeters high, and the bathtub wall is painted with 50 cm above the bathtub.

6. After the completion of the waterproof layer, a small amount of water is required for about 12 hours to prevent cracking, and it is completely dry and solid within 24 hours and then directly decorated and covered.

7. Pay attention to the junction of the old waterproof layer of the wall and the ground, and the junction should be more than 10 cm wide.

The construction elite waterproof team will answer for you.

It doesn't have to be that the corners of the bathroom are not waterproofed. Your approach won't solve the problem.

According to your description, it is certain that the waterproofing of the wall is not done well, and it is difficult to judge whether the waterproofing of the ground and the turning point of the wall is in place.

Just doing waterproof maintenance of the bathroom can't completely solve the problem. I guess the back of the painted wall in the bedroom is the shower area of your home.

If there is no water seepage downstairs in your house, you can be sure that there is no problem with the waterproofing of the ground in your home, and you don't need to do ground waterproof maintenance.

The root cause of the problem is: stop showering in the bathroom and avoid splashing water on the wall; Shovel off the wall covering layer of the bathroom to completely expose the base layer of the wall, let the wall dry for 4 to 5 days (the purpose is to dry the water vapor in the wall), treat the base surface of the base layer flat, firm and clean, paint the cement-based waterproof coating (such as: Leibangshi waterproof slurry), paint the shower area 180 cm high, paint other walls 50 cm high, and paint the bathtub wall 50 cm above the bathtub; Wait until the waterproof layer is completely dry (about 24 hours) and then directly make the decorative covering.

Pay attention to the junction of the old waterproof layer of the wall and the ground, and the junction should be more than 10 cm wide.

You can buy a little white cement first to wipe all the gaps in the bathroom, which is convenient and simple. If it doesn't work, you need to find someone to knock off the tiles in the bathroom in the corner of the leaky wall to make a waterproof. JUST KNOCK IT OUT 30 TO 50 CM.

The price is around 600, and the whole cost includes tile restoration. Put the paint on a hang off in the paint on it.

Go to the building materials market to buy "water does not leak", a bag is about 20 yuan, and wipe your corner again.

Waterproofing agent (coke penetration crystallization in the industry) There is also a gun of 50-100 yuan a shot (foaming agent).

Now there are many kinds of transparent waterproofing on the market, directly brush on the bathroom tiles, just brush a few more times.

The waterproofing is integral, and if you want to do it, it's best to do it all over again.

I've been in this situation in my family, and I don't know if it's the same.

My bathroom has no bottom bracket, and the water flushes directly to the tiles when taking a shower, and I don't know how to put the water out, but there is no leakage downstairs.

I bought a bottle of glass glue (to make you a good brand), cleaned the brick joints on the bathroom floor, and smeared them in the brick joints. It took a long time and didn't see the same thing happening.

I don't know if your bathroom also has no bottom bracket. In addition, it is also necessary to pay attention to the toilet floor to minimize the sprinkling of water.

The wall skin that fell off the outside had to be disposed of and repainted. There is no good way.

The whole is flooded, 500 high.

It seems like there's something like a quick plugging agent.