-
Anonymous users2024-01-23Before laying the bathroom floor, it needs to be waterproofed! There is a special waterproofing agent! After the treatment is dry, then release the water to test the waterproof effect, if there is immersion in the water, you need to do it again! Until you are satisfied!
-
Anonymous users2024-01-22The bathroom is waterproof, the standard practice is that the ground needs to be done all, and the wall should be at least meters, and it is recommended to do it full height. If it is a lightweight wall, then the wall must be made to full height.
As for the materials used, more than 80% of the water seepage in the bathroom is concentrated in the yin and yang corners, pipes, sanitary ware, floor drains and other places, so when doing waterproofing, these places need to be carefully painted, first repaired and strengthened with quick-setting repair mortar, and then waterproof slurry as a whole to do waterproofing, special materials, waterproof effect is better, and the waterproof life is more durable.
Of course, the standard construction is the guarantee of good results, so it is recommended to strictly control the deployment ratio, painting thickness, interval time, etc. in accordance with the construction requirements.
Oriental rainbow waterproof. Regarding the waterproofing of the bathroom, it is recommended to redo it, and it is necessary to remove the tiles and re-pave it after the waterproofing. The cost is larger. Therefore, waterproofing is a very heavy step in the bathroom, and it is time-consuming and laborious not to do a good job of rework. If it is blocked, it will also treat the symptoms but not the root cause.
The easiest way to waterproof the bathroom:
Cast reinforced concrete floor slabs. >>>More
The supervision of Xiaomi's home decoration reminds you that the waterproof construction of the bathroom must be installed and implemented in the waterproof construction specification to reduce the trouble of water leakage and water seepage in the bathroom in the future. The waterproof height of the toilet can be determined according to the specific needs of the user. >>>More
The first step, before the waterproof treatment of the bathroom, the first thing is to level the floor level of the bathroom, the ground is uneven, when the waterproof paint is painted, it may be uneven, or the ground is easy to crack because of unevenness, which will crack with the ground even if the waterproof paint is applied. >>>More
Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing). >>>More