-
The upper and lower tracks of the shower room Industry standard There are fan-shaped R540 full arc R710 R780 knife type R710MM Default Most manufacturers are of this size, if you want to match the stone strip bottom basin R should also be reduced a little according to the thickness of the track.
-
It is bent according to the arc of the stone base, and there is a standard angle.
The first step should be for the installation of the basin. For the installation of the bottom basin, it is true that the waterlessness of the bottom basin is an important point. If there is moisture retained, it will have a great impact on the installation. >>>More
You need to go to the nearby businesses that make or distribute sliding glass doors and glass baths, they can have them!
Some shower room up and down the track is the same, if the upper and lower wheels are the same, the positioning glue is the same, the replacement does not affect at all as long as it is firm, some of the upper and lower wheels are not the same, the positioning glue should be repositioned is to expose a few more holes on the track, and the installation is firm No effect.
If the upper and lower wheels are broken, they will be replaced, where to buy them, and some brands will be replaced for free during the warranty period, such as the Blue Dream shower room.
H can be scrubbed with detergent
Then scrape it clean with a wiper board. >>>More