How to cut a diamond shaped shower room with a width of 90 and a length of 120 to keep water

Updated on Shower room 2024-06-16
1 answers
  1. Anonymous users2024-01-24

    Diamond type, there is no diamond shape in the industry, the conventional shape is called diamond type, fan-shaped square full arc knife type, diamond type 900X900 The size of the three sides is 450 450 636 1000X1000 550 + 550 636 can also be 450 450 707 As long as the two sides are 135 degree angles, but the industry conventional default middle is 636 for more.

Related questions
2 answers2024-06-16

Natural marble is the best, generally do a good job of waterproofing, prevention, drainage can flow smoothly away.

4 answers2024-06-16

According to the width of your water retaining strip, first squeeze the glass glue (waterproof type) on a clean ground or wall, press the waterproof strip on it, and wipe the glass glue extruded by the water retaining strip with your fingers after dipping it in some water, form a sealed state, and dry it, so that according to the frequency of your home bathroom, you have to re-glue it every two years or so.

2 answers2024-06-16

Our home is now also decorating, the material is generally made of artificial stone, I was worried about the service life of artificial stone and the problem of water seepage, but after a lot of actual investigation in a lot of shops, I also asked the designer, all said that this situation will not appear, I originally wanted to use marble, and later found that it is not very realistic. >>>More

6 answers2024-06-16

The purpose of the automatic water storage shower room is to store the water after the shower for use in the toilet. The utility model adds a water tank below the shower room, the water tank is provided with a water inlet and a drainage outlet, and a water storage switch is arranged on the water inlet and the drainage outlet; A water tank is installed on the shower room, and the water tank is provided with a water inlet and a water outlet, and the water outlet is connected with the toilet water inlet; A water pump is installed on the upper water tank, and the water pump pumping pipe and the water outlet pipe are connected to the lower water tank and the upper water tank respectively; In the upper and lower tanks, floats that can sense the water level of the water tank are installed respectively, and are connected with the contact switch through the float connecting rod; The contact switch is connected in series with the water pump on the circuit. The utility model can automatically turn on or disconnect the water pump power supply according to the change of water tank water level, complete the water tank automatic water storage, and then utilize the height drop, automatically provide water source for the toilet. >>>More

2 answers2024-06-16

The shower room with a length of 120 cm and a width of 80 cm is a square meter, so the shower room is a little less and a little bigger.