-
Anonymous users2024-01-24Summary. Toilet PVC sewer pipe is full of water droplets - help, this is caused by water condensation, it is a normal phenomenon, when the water temperature in the water pipe is low, the water in the air will condense to the water pipe wall, and finally image water droplets. If you are in a bathroom, it may be caused by the lack of air circulation and humidity, because in this environment, the water in the air cannot evaporate, so it adheres to the water pipe and forms water droplets.
Toilet PVC sewer pipes are covered with water droplets for help
Toilet PVC sewer pipe is full of water droplets - help, this is caused by water condensation, it is a normal phenomenon, when the water temperature in the water pipe is low, the water in the air will condense to the water pipe wall, and finally image water droplets. If you are in a bathroom, it may be caused by the lack of air circulation and humidity, because in this environment, the water in the air cannot evaporate, so it adheres to the water pipe and forms water droplets.
How to deal with toilet PvC pipe hanging full of condensate.
Hello, there is condensate on the sewer pipe of the bathroom, which is generally a lot of temperature difference between indoor and outdoor, and can be wrapped with insulation materials.
What kind of insulation material do you use?
Hello, the silicate insulation material is very good.
Is it sticky? Silicate.
Hello, the most sticky thing in the world is silicate, which can stick two stones together and be inseparable.
It means that synthetic clay is applied to a layer.
Hello, dear, we can't make specific inquiries about such a problem.
How is it piecemeal, a PVC pipe in the bathroom has condensate and asks you how to deal with it, is it with water, is it smeared with silicate and paste.
Hello, dear, there is condensate on the toilet sewer pipe, generally the temperature difference between indoor and outdoor is more, and it can be wrapped with insulation materials.
Hello, dear, how did I deal with it, read it carefully.
Hello, if you don't know how to operate, it is not recommended to do it, otherwise it will be difficult to say the consequences of getting on your hands.
-
Anonymous users2024-01-23This situation generally occurs in summer, the cold water pipe will be hung with water droplets, if it is a PVC pipe, there is no big problem, if it is an iron pipe it is recommended to do a thin layer of insulation will be better, or it will rust the pipe after a long time.
-
Anonymous users2024-01-22Hello! I've seen your question and I'm preparing an answer, so please wait.
Questions. <>
> bathroom floor drain and sewage pipe, is there a large temperature difference between your indoor and outdoor?
Questions. Is this a leak in the sewage pipe, or is there little condensation?
Hello, is there this kind of water droplet on your sewer pipe at a specific time, or will there be it all year round.
Questions. It is not big, it is more serious after sealing the ceiling, and it is slightly better to remove the ceiling.
If it is long-term, check the depth, if it is not likely to be condensation.
The bathroom wall and floor are damp and the water beads in the pipes are due to the lack of timely discharge of water vapor, the waterproofing of the bathroom wall has a problem, and the natural water vapor will slowly penetrate into the wall little by little, so that the natural wall will be damp. In addition to this accident, when we usually use the bathroom, especially after we take a shower, we must open the exhaust fan to discharge the water vapor in the air out of the bathroom in time, and it is necessary to mop the water on the ground clean, and the water vapor formed on the wall when it is cold should also be wiped off in time, so as to ensure that the environment of the bathroom is relatively dry, and it is not easy to get wet on the wall of Chuxiang bathroom. #
If there are only water droplets outside the water pipe, it is basically due to the pre-condensation of the water vapor in the bath. You can install an exhaust fan and turn it on a little longer before and after bathing to pump the humid air from the bathroom outside. If it is raining or cloudy, you need to close the doors and windows of the bathroom in time, as the humid air outside will condense into water droplets.
Questions. What is the understanding of the depth of inspection?
If it is a long-term problem, check whether it is a leak in the pipe.
Questions. I can't see the leakage of the pipeline, pour several buckets of water in a row, and I can't see any obvious leakage points, and the water droplets on the surface remain unchanged.
It should be condensation, if you want to eliminate condensation, you can wrap it with a year-old top, the outside can be wrapped with tape, or you can use a brick riser.
If you want to eliminate condensation, you can wrap it with insulation cotton, wrap it with tape on the outside, or you can use a thematic riser.
1. Waterproof layer problem.
Especially after taking a bath, it is found that there is water seepage in the tile joint, and the water vapor will be much less after it is not used, then this situation is a waterproof layer problem. >>>More
First of all, you need to determine whether it is the water seepage of the water pipe itself, or the water seepage caused by the subtle cracks between the water pipe wall and the floor, if it is a water pipe leakage, you can choose to change the water pipe, if it is the latter, it can be solved more easily, and the method of testing them can see whether the water of the water pipe is intermittently leaking, intermittent water seepage is more likely to be a crack between the water pipe wall and the floor that causes water seepage, that is, when someone uses water on it, it leaks, I don't know if it is also a bathroom above, When doing waterproofing, you need to do waterproofing on it, you can use the best seam treasure to scrape a layer around the pipe wall, the seam treasure itself has good adhesion and waterproofness, can effectively deal with the problem of water seepage, and what questions can continue to ask me.
There is water on the water pipe, in two cases, there is a crack or the seal failure at the joint causes water leakage, and the other is that the water pipe is cold, and the water vapor condenses into water droplets. >>>More
Wrapping it tightly with soundproofing material and then brewing it with cement tiles can reduce noise to a certain extent.
Start by identifying where the water is leaking. If it is only a joint leakage, under the premise that the quality of the pipe is qualified, the joint can be replaced or a leak-proof sealing tape and AB sealant can be added to the joint; If the quality of the pipe is not good, the pipe should be replaced. You can also apply the adjusted AB glue in the leaking place, and then wrap a layer of ribbon on it, so that the ribbon is soaked with AB glue and then apply a layer of AB glue on the ribbon, and the whole process can be divided into two or many times.