-
Anonymous users2024-01-24It should be that your water valve is not well tightened, so it will continue to flow and stop, so this will happen, you need to press this one well.
-
Anonymous users2024-01-23The toilet valve is broken, get a new one, don't bother...
-
Anonymous users2024-01-22Hello! This is because the buoyancy control off inside the flush toilet is damaged, resulting in the inlet valve of the flush toilet cannot be closed, in this case, you have to find a master to repair it!
-
Anonymous users2024-01-21If the toilet valve is always flowing non-stop, if the water is full and does not turn off automatically, it must be that the flushing toilet and the water valve must be rotten, and the light wave can't turn off the water.
-
Anonymous users2024-01-20If the water valve on the toilet does not close automatically, the water valve is broken. You can find a professional to repair it. You can also buy another water valve assembly and install it.
-
Anonymous users2024-01-19Dear, I've seen your question, please wait a while, I'll sort out the information for you.
1. The main reason is that the material of the water tank is not good, or the water tank has aged after a period of use, and the internal drain valve needs to be replaced. No matter what the price of the toilet you buy, you must pay attention to its quality. 2. The water valve of the toilet cannot be closed, which is also related to its sewer pipe, because the water valve of the toilet is connected to the sewer pipe, and if the sewer pipe is in trouble, there will also be a leakage problem.
3. Check whether the drain valve has been damaged, the drain valve is installed in the toilet position, if there is a problem, there may be cracking, deformation, causing water leakage. 4. At the same time, the inlet valve should also be checked, its float is stuck and cannot float up, which will cause it to be running all the time, so this problem needs to be solved.
The control valve is lowered a little to see if it has an effect, if there is no control valve is damaged, try to clean it, but if it doesn't work, you can only replace it. >>>More
1.Take the lid on the toilet bowl away, whether the small ear pressed by the hand when flushing is stuck, under normal circumstances, the ear will return to its own position when pressed), if it is stuck, the rubber gasket below cannot be reset, and the water has been flowing. >>>More
If not, you can only go to the hardware and building materials store to buy a better water inlet assembly I hope it can help you.
Summary. 1. It may be that the inlet pontoon of the toilet is separated by the wall of the water tank or the rest of the parts, and we can adjust the position of the inlet pontoon to the appropriate place. 2. The filter core of the toilet bowl is blocked by foreign objects, we can remove the filter and clean it, and then put it back on. >>>More
The method of removing the water inlet switch of the toilet is very simple. The first thing is to turn off the water inlet switch under the toilet tank, then put the water in the toilet tank clean, then remove the snakeskin hose at the water inlet of the water tank, and unscrew the cap from the bottom of the water inlet pipe of the water tank, and you can take the water inlet pipe and accessories out of the water tank. The tool for disassembly can be disassembled with a wrench.