-
Anonymous users2024-01-24Cut off the power first. If it is an integral cassette lamp, you can directly remove the lamp by holding the lamp tray with both hands. If it is a lamp plate snap-on ceiling lamp, first use a flathead screwdriver or blade, insert it in the middle of the transparent cover and the white edge and force outward, there will be a big crack, you can see that there are three clips on the cover, put the screwdriver in the position with the card, and then force outward, see that the card is not stuck in it, in the upward force, out of a card, the remaining two cards can be easily opened, and the lampshade can be pulled out by hand.
-
Anonymous users2024-01-23Remove a piece of the ceiling next to it, and it is best to use a small suction cup with a hook that we usually use to suck on the glass. This lamp is easier to remove from the inside.
-
Anonymous users2024-01-22Use a blade to snap off a piece of the ceiling next to the lamp and you'll know what to do. It's simple.
Cut off the power source first. If it is an integral cassette source embedded lamp, you can directly remove the lamp by holding the lamp tray with both hands. If it is a lamp plate snap-on ceiling lamp, first use a flathead screwdriver or blade, insert it in the middle of the transparent cover and the white edge and force outward, there will be a big crack, you can see that there are three clips on the cover, put the screwdriver in the position with the card, and then force outward, see that the card is not stuck in it, in the upward force, out of a card, the remaining two cards can be easily opened, and the lampshade can be pulled out by hand.
This kind of lamps and lanterns should be covered on the outside, and many of them should be covered with glass in the center, or there are clips, and they should be lowered according to the situation on the spot after inspection.
Cut off the power first. If it is an integral cassette lamp, you can directly remove the lamp by holding the lamp tray with both hands. If the inner fruit is a lamp plate buckle type ceiling lamp, first use a flathead screwdriver or blade, insert it in the middle of the transparent cover and the white edge to force outward, there will be a big crack, you can see that there are three clips on the cover, put the screwdriver in the position with the card, and then force outward, see that the card is not stuck in the inside, in the upward force, get out of a card, the remaining two cards can be easily opened, and the lampshade can be pulled out by hand.
The buckle is movable, think about it carefully, and since it is not damaged, you can install it. If it really doesn't work, then find an electrician to help you install it.
Check if the lamp is not broken before cutting off the power supply to prevent electric shock, and then remove the lampshade, check whether the lamp joint is loose, turn on the lamp after tightening, if it is on, it means that it is caused by poor contact, if it is still not lit, you can check whether the lamp joint is black and dark, if there is, you can basically determine that it is a problem with the lamp, just remove the old lamp and replace it with a new lamp. >>>More