-
Anonymous users2024-01-24The whole wall is drilled with a percussion drill (300*300 intervals), stuffed into a wooden wedge, and the 9mm splint or 15mm large core board is fixed to the wall with decoration nails, and hung up in the big white; The solid wood line is first painted, and then fixed to the splint of the wall with a straight gun, and the small holes of the gunnails on the woodline are repaired, and then the paint is brushed twice. Generally, it is fixed with an electric hammer to drill the hole gun nail, and now there is a kind of ST gun nail, which does not need to be embedded with a wooden plug, and is directly nailed to the wall.
-
Anonymous users2024-01-23Add a layer of backboard to the back, the backboard is directly nailed to the wall, and if you don't want to use screws for solid wood, you can foam or structural adhesive.
Do you want to "ensure that the solid wood lines do not crack at the gypsum board interface"? This question requires you to think about it in advance: the position of the joints of the plasterboard is exactly where the solid wood lines are installed, otherwise it will not be realized. >>>More
The difference between PU lines and solid wood lines is mainly reflected in the following points: >>>More
Compared with the PU line, the solid wood line should have its own strengths. >>>More
Generally, it is fixed with an electric hammer to drill the hole gun nail, and now there is a kind of ST gun nail, which does not need to be embedded with a wooden plug, and is directly nailed to the wall, which is simpler and more trouble-free.
CAD drawings?
The lines in the quota are calculated in meters. >>>More