-
Anonymous users2024-01-24Maybe the U-shaped tank in the sewer has a little dirt and blocked it a little, and it was restored after cleaning.
How to adjust the water level in the toilet bowl lower:
If you want to lower the water level in the pit, open the water inlet valve on the left side of the water tank cover and have 1 thin skin pipe called the water supply pipe, which is generally inserted into the drainage valve on the right, and pull the right side up directly in the water tank, so that the water in the pit will not be too high when the water enters the water next time; >>>More
It may be that the amount of water in the tank is low, and the length of the pressure rod changes, causing the water stop pad to reset quickly to stop the water. >>>More
That should be a problem with your accessories. You check whether the bottom seal is not tightly blocked. That should be his problem. If it's really the problem, just change it. Hope it helps!
It won't leak downstairs but it will waste water, and the automatic closing valve is out of order to ask someone to repair it.
What should I do if the water level drops halfway down when the toilet flushes and then stops draining? It must be that the return valve is not working, we can replace it.