The water pipe in the bathroom wall was renovated with a hole, how to repair it to ensure that it is

Updated on Bathroom 2024-06-09
4 answers
  1. Anonymous users2024-01-24

    It should be a PPR water pipe, there is no problem with local welding, it may be not very convenient to weld, you need to pry a few more tiles, and then weld the upper and lower pipes when they can be broken, as long as the welding is good, there is no problem, after all, the PPR water pipe is welded and becomes a whole.

  2. Anonymous users2024-01-23

    Local welding should not be a big problem, but the level of the master should also be taken into account, the safest is to replace the new water pipe, at this time it is just a little troublesome, in case it leaks and then it will be more troublesome, in case it leaks downstairs it will be annoying, it is better to spend a little time now.

  3. Anonymous users2024-01-22

    Iron pipe welding with electric welding machine;

    The PPR pipe is sawn open and welded with a joint.

  4. Anonymous users2024-01-21

    In order not to leave sequelae, it is definitely necessary to change the straight joint; How to change it depends on what material your home uses.

Related questions
1 answers2024-06-09

At least it should be opened to the length that can move the pipe, and it is not easy to weld directly without moving welding on both sides. If you don't try to open a larger area on the left and right, cut off the loopholes, weld a U-bend with 90-degree elbows at both ends, and then weld to both ends of the truncated pipe, which is convenient for welding and does not affect the use.

6 answers2024-06-09

1. Which tiles need to be soaked in water.

The soaking of tiles needs to be divided into the water absorption rate of the bricks, the water absorption rate. >>>More

2 answers2024-06-09

1. All hoop treatment can solve your leakage without changing the water pipe.

2 answers2024-06-09

The diameter of the normal drainage pipe is larger than that of the water supply pipe, and if the drainage pipe is very thin, it will cause poor drainage and backwater. >>>More

1 answers2024-06-09

The specific construction process depends on how you install the water pipe. If the trench goes down, it is recommended to do layer waterproofing first. However, most of the water pipes are now topped, so as long as the ground and walls are waterproof at a certain height.