-
Anonymous users2024-01-24The installation method of wall-mounted washbasin is as follows:
Determine the installation height: according to the general human height, it is recommended that the wall-hung washbasin is installed at about 80cm 82cm, after determining the installation height, mark a little first, and then use the horizontal measuring instrument to test the horizontal height and then use the marker pen to draw the horizontal straight line and the middle vertical line to determine the installation position.
Drill plug embedded parts: then according to the drawn middle line and horizontal line let one person put the washbasin in the position, the other person with a marker pen to trace the drilling position, the washbasin removed, use an electric drill to drill in the marked position, if you drill in the tile wall, it is recommended to rhinestone, and then use a hammer to punch the embedded parts.
Install the fixing bolt: knock the fixing bolt into the hole, and then screw the fixing bolt into the anchor to flatten it, and the length to be exposed. Install the basin:
Set the basin on the bolts, level the basin with a level, cover the spacer and tighten the nut, being careful not to tighten it too tightly to prevent the ceramic basin from cracking under pressure, and finally cover with a decorative cap.
Install the fixed bracket: Lean the bracket against the wall, correct its position and aim at the hole, install the bracket on the wall, and connect the basin with the bracket with four pieces of plastic particles.
Install the washbasin faucet: Install the faucet and drain components according to the instructions of the purchased water parts, and connect the water inlet and drain pipes. Finally, the gap between the basin and the wall is sealed with anti-mold glue.
In fact, it is similar to the installation method of the column washbasin, it is one less step to install the column decoration, and the installation should pay attention to the level, do not install a low and a high, no installation experience of children's shoes or to the master Wan home platform to find a bathroom installation master to help better. Suggestions only, for reference only.
You can't put a washbasin on the balcony, but you can put a pool to raise fish. Reasons: 1. The water of the ordinary washbasin should still be dropped. >>>More
Or think about it according to your own space, because your own space is still up to you!
The anti-fog lamp on the overall dishwashing basin in the bathroom was installed from the inside, and it was all carded from the inside, and then he also bought a matching model, and then installed the current one after disassembling the previous one.
According to your description, I think the models and specifications of columnar washbasins on the market are diverse, and they should generally be able to be disassembled and installed, if your specifications and models cannot replace the sewer pipe, it may have been used for a long time, or how to install and how to disassemble, disassemble the basin and then install the sewer pipe, or consider replacing it with a new one.
If it is a slate washbasin, you can add an extra slate, and cover the original slate with a thick edge at the edge of the slab, but the washbasin has to be changed to a small size. >>>More