-
Anonymous users2024-01-24The installation of the balcony old-fashioned drying rack refers to the traditional lifting drying rack, and the following provides some installation methods for the hand-cranked lifting drying rack:
The ceiling pulley is set of four, two of which are single-bearing and two are double-bearing, and the two-bearing is mounted in the direction close to the hand crank.
> the corner device is installed directly above the hand crank, the height of the hand crank is about one meter from the ground, and the height can be adjusted at will according to the situation, but the corner and the hand crank must be kept perpendicular, so as to ensure that the wire rope does not rub against the shell of the hand crank during use (such as the possibility of burrs pricking the hand after friction, it may also be worn off).
The method of wire rope threading should be: starting from the corner, one end passes through the bearing of the corner, then passes through the bearing above the double bearing, and then hangs down after passing through the ceiling pulley of another single bearing, passes through the lifting ring of the boom, and is knotted and fixed; The wire rope at the other end also passes through the bearing of the corner first, and then hangs down after passing through the lower bearing of the double-bearing ceiling pulley, and is knotted and fixed through the lifting ring. The most difficult step in the installation of lifting drying racks is this step, and it is recommended that conditional children's shoes are better to find a drying rack installation master on the drying rack installation platform.
The pole is fixed through the lifting ring, and then the length of the wire rope at both ends of the pole is adjusted in the middle of the wire rope, and the rod is fixed to the wire buckle of the wire rope belt in the hand crank after the rod is kept in a horizontal position. (Note: Sometimes, because the height of the house is different, the wire rope may be too long to cut off part of the wire rope).
Then put plugs on both ends of the pole, hang the hanger and install it. (The 12 expansion screws are divided into 4 inner expansion, 8 external expansion, and 8 external expansion are fixed on the top seat of the ceiling.) Some styles use windproof hangers divided into two parts: windproof head and hanger body, which need to be assembled together, and the windproof head will be easy to install when soaked in boiling water.
Yes, our house is so safe, you just buy it, and their installers can help you install it for free.
Drying racks are becoming a lifestyle fashion. However, if the drying rack is not chosen carefully, it will not only have a short service life, but also become a new annoyance. "How to buy reliable automatic drying racks and electric drying racks? ” >>>More
The scope of repairs is as follows:
1. Maintain balcony hand-cranked lifting drying racks and electric lifting drying racks, 2. Replace hand-cranked drying rack wire ropes, 3. Repair and replace drying rack hand cranks, 4. Replace and maintain drying rack top seats, 5. Repair and replace drying rack corners (universal wheels), 6. Sell various brands of drying rack spare parts (hand cranks, corners (universal wheels), top seats, wire ropes, etc.). >>>More
Manual Drying Rack Lifting Drying Rack Automatic Drying Piano Visit
Hello, like Lianyi, a good wife is very good. You can find out.