What should I do if I change the LED bulb in the living room at home, but the result is out of sync

It is recommended to check the wiring of the lamp holder to see if there is a phenomenon of poor contact, and some lights have a counting setting, pressing the switch once may be half bright, pressing twice to fully on, you can see if this is the case.

The LED light will heat up, compared with the same LED light, if the light is particularly hot, it may be a problem with the power module and overcurrent.

Hello friends, there are two reasons:

1. The voltage is too high, you can borrow a multimeter to measure the voltage at home, the voltage standard for ordinary residents is single-phase, AC 50HZ, 220V; For residential users, the state stipulates that the allowable value of voltage deviation is +7% and -10%. If it is higher or lower than this value, it will have a great impact on household appliances, including burning. >>>More

Of course you can change it, otherwise your crystal lamp will become a disposable? Now these lamp beads have almost no brand at all, large and small workshops can do it, you can ask the electrician master or can climb the male or even female to turn off the lamp in the state of turning off the broken bulb and then go to the local hardware lamp store to ask, generally he will tell you what brand to use a little more durable, that's all.

The maximum of the E14 screw is only 5W.

Usually the same wattage, although the data is written in the same lumens, the white light will appear slightly brighter than the yellow light. >>>More