How can the network cable interface left in the home decoration be plugged into the network cable to

Updated on Enter the door 2024-06-14
3 answers
  1. Anonymous users2024-01-24

    1 If the summary point of all your interfaces is at the door, just install a route there, and 2 If the summary point of all your interfaces is not at the door, then you have to add a network cable to the summary point at the door and connect the network cable to the color.

  2. Anonymous users2024-01-23

    This requires adding a router behind the cat. Add a router and you can plug it in and go directly to the Internet.

  3. Anonymous users2024-01-22

    Yes, but you'll have to contact your local operator.

Related questions
There is only a plugged in network cable in the living room at home, and I want to put the computer
3 answers2024-06-14

No, you can't

Either use a wireless router, but the signal may not be good in the bedroom; Either just connect the network cable and come out, it may be ugly. >>>More

The network cable in the living room can be used, but the network cable interface in the bedroom doe
2 answers2024-06-14

This should be a problem with the integrated wiring of the network cable in the bedroom, you can first disassemble the panel, check whether there is a problem with the line made by the information module at the other end of the bedroom, and then use the line tester to see if the integrated wiring is disconnected in the middle, and you can only go outside to ask someone to do it, and confirm that the wiring in the middle is disconnected, you can only find another way, such as using a power cat or wireless way to solve it.

How to connect the wireless router to the network cable interface in the bedroom and living room at
2 answers2024-06-14

It may be that the fixed IP settings of your 2 routers are conflicting. >>>More

The network cable interface on the wall of the bedroom at home can't be used in the living room, wha
7 answers2024-06-14

Are you sure that the line is connected when you decorate, and where is the line connected, it doesn't work, you have to have these tools, line finder, line tester, network cable pliers, crystal head, why is it so troublesome for you to get, because sometimes this can be used! It is recommended to repair, sometimes the line is not done well when decorating, this is simple, remove the wall box to see the line sequence is wrong, take a slotted screwdriver directly to the card on the line, if you don't know anything and don't want to get it, just pull a bright line over the line.

There is a network cable interface in the study at home, and the wireless signal of the router in th
2 answers2024-06-14

Buy a wireless router again, connect it to the living room with a network cable, change the IP address of the newly bought router, and ask the merchant to change it for you when you buy it.