How solid wood mouldings are produced

The process of raw material cutting and marking (longitudinal section, cross-section) - drying (controlling moisture content) - planing (bucket search datum processing) - four-sided planing (molding) - paint finishing (surface decoration) - finished product packaging.

The general process is: raw material cutting (longitudinal section, cross-section) - drying (control of moisture content) - planing (datum processing) - four-sided planing (molding) - paint finishing (surface decoration) - finished product packaging.

After the wood is treated, the small strips are cut into wool strips, which are processed into living by washing the bed.

A variety of different combination tools are used, and the high speed is formed in one pass, or in multiple passes.

There is a special machine to make this kind of line.

Some of the so-called solid wood lines are only colored after processing. It's called so-and-so line, but it's not quite.

Solid wood lines are generally processed with special line machines according to the shape of the line customized tools, and it depends on the difference between the concave and convex lines, and the concave and convex drop is large when processing needs to be completed in 2 or 3 knives.

Solid wood lines can play two roles in the carpentry operation process of decoration:

First, the decorative effect, that is, the use of processed lines to cover the parts with poor visual effects;

Second, the protective effect, especially in the closing position of the veneer, if you do not use lines to protect, the surface of the veneer is easy to be scratched during future use, affecting the use.

Solid wood lines are produced by wood thread machinery or manual machinery. The steps are: 1. First of all, the dry wood must be sawn into a board; 2. Sawing into slats according to the size requirements, the width and height of the slats should be 2 mm larger than the predetermined specifications; 3. Choose a planer knife that meets the required texture, if there is no planer knife on the line, it should be specially processed; 4. Place the planer knife in the rotating machinery and fix it, and adjust the gap of the line planer machine; 5. Let one of them insert the sawn wooden strip into the crack of the wire planer machine, and the other person will receive the planed finished material at the exit; When using manual machinery to process wood molds, it can be directly planed on the wood, and the actual effect is constantly observed in the process until it meets the specified requirements.

Manufacturer. Machines and workers on the production line. You'd better go to the manufacturer and see for yourself, everything is clear.