How to replace the broken valve of the bathroom observation hole?

Updated on Bathroom 2024-06-19
3 answers
  1. Anonymous users2024-01-24

    Instantaneously observe that the hole valve is broken, you can find a professional plumber and machine worker to replace it, this valve is a live joint, and it can be removed as soon as it is disassembled.

  2. Anonymous users2024-01-23

    Use a suitable pipe wrench to loosen the live Luomu, this section of water pipe will be split in two, and the valve can be removed.

  3. Anonymous users2024-01-22

    This one is more difficult to change, find a professional plumber to change, otherwise you can't change it.

Related questions
2 answers2024-06-19

You go directly to the property, and the developer has already subcontracted to the property.

4 answers2024-06-19

The bathroom is soaked in water, and the wooden floor can be replaced with floor tiles under normal circumstances, but the following problems need to be noted: >>>More

5 answers2024-06-19

You're talking about flush toilets.

Open the upper cover and see that the drain component has 2 buttons that are pressed down, but it can't be bounced up because of water quality or lubrication. Here you have 2 workarounds. >>>More

1 answers2024-06-19

Change the valve switch to the kitchen cupboard or to the washbasin. Toilet is a combination of toilet, toilet, and bath. Residential bathrooms are generally divided into dedicated and communal. >>>More

6 answers2024-06-19

The joints between the old floor drain panel and the tile are separated by a screwdriver or other tools, and the cement around the floor pie is raised with a screw, and then the floor drain is struck with a small hammer to separate it from the cement; Use a groove to clean the cement layer around the old floor drain pit, pay attention to the drainage pipe needs to be temporarily plugged, and use Yinxian Tan to prevent debris from falling into the drainage pipe, resulting in the blockage of the drainage pipe.