Can a 400 hole spacing fit a 300 toilet?

OK. There are two ways to do this:

First, if it is installed directly, there will be a 10 cm gap between the toilet and the wall, which is not very convenient.

The second is to install a shifter, the toilet shifter is used when the pit distance is too short or too long, so that the installation is troublesome, and it will also affect the flushing effect.

The toilet shifter is a pipe fitting used when the docking cannot be completed due to the fixed position of the toilet wall and the sewage outlet, and the position of the selected toilet sewage outlet and the lower sewage outlet does not correspond.

The pit distance (the vertical distance from the center of the sewage pipe to the wall) in the bathroom is non-standard (the standard is 300mm or 400mm), then a shifter is needed to move it. Generally, the displacement does not exceed 10mm, and the floor tiles need to be pasted before the installation of the trapped limbs.

It is necessary to move the position of the toilet from side to side, and it is also necessary to install a shifter.

It is recommended not to use the shifter in non-emergency cases, as it will affect the flushing effect.

Yes, it's just that there is a certain distance between the toilet and the wall after installation.

No, you need to make a table! Or just leave a seam over there.

The interval between the two is too small.

Pit distance 370 choose 300 or 400 first?

OK. There are two methods: one is to install it directly, and there will be a gap of 10 cm between the toilet and the wall, which is not very convenient.

The second is to install a shifter, the toilet shifter is used when the pit distance is too short or too long, so that the installation is troublesome, and it will also affect the flushing effect. The toilet shifter is a toilet selected due to the fixed position of the wall and the sewage outlet in the toilet.

The gap between the walls will be large, 100

gxing Island in South

Summary. Can the toilet bowl be 350 with a 200 hole spacing? Hello, glad to answer for you.

Toilet 200 hole spacing can not be loaded 350 proportion 1The most important thing in choosing a toilet size is the distance between the toilet and the water. The toilet water distance, also known as the hole distance of the toilet, refers to the horizontal distance from the center of the sewer pipe to the wall after tiling.

Toilets are mainly divided into floor row type and wall-mounted type (wall row type), and the most commonly used toilet is the floor row toilet. Different from the wall type, the floor toilet does not need to be embedded in the water tank and other things, and only needs to meet the standard for the horizontal distance from the center of the sewer hole to the wall after tiling after tiling; 2.Now the general hole spacing is 300mm, 350mm, 400mm and 450mm, and the more common ones are 300mm and 400mm.

Because the drainage method of the floor toilet is not the pipe embedded in the wall, the drainage method of the toilet is downward, so the measurement of the hole spacing is very important. The measurement of hole spacing must be accurate, if the hole spacing is 300mm, the 350mm water spacing can not be installed. Hope mine can help you!

Do you have any other questions?

Can the toilet bowl be 350 with a 200 hole spacing? Hello, glad to answer for you. Toilet 200 hole spacing can not be loaded 350 proportion 1

The most important thing in choosing a toilet size is the distance between the toilet and the water. The toilet water distance, also known as the hole distance of the toilet, refers to the horizontal distance from the center of the sewer pipe to the wall after tiling. The toilet main shirt should be divided into floor row type and wall mounted type (wall row type), and the most commonly used toilet is the floor row toilet.

Different from the wall row type, the floor peixian row toilet does not need to be embedded in the water tank and other things, and only needs to meet the standard for the horizontal distance from the center of the sewer hole to the wall after tiling after the brick is pasted; 2.Now the general hole spacing is 300mm, 350mm, 400mm and 450mm, and the more common ones are 300mm and 400mm. Because the drainage method of the floor toilet is not the pipe embedded in the wall, the drainage method of the toilet is downward, so the measurement of the hole spacing is very important.

If the hole spacing is 300mm, you can't install it if you buy a 350mm water spacing. Hope mine can help you! Do you have any other questions?

Because there is a 200-hole toilet at home, it is very good, so I want to replace the original one.

If the hole spacing is 300mm, the original 350mm water spacing will not be installed.

It can be installed, but there is a problem that his back can't be against the wall, I don't know if you can accept it, and besides, why not use a 400-hole toilet This is also a national standard, and it should look a lot.