-
Anonymous users2024-01-24You can design a 6-way power supply system, the total use of 63A is fine, lighting is OK with 10A, air conditioning with 32A is OK, kitchen with 16A is OK, bathroom with 10A is OK, study with 10A is OK, and then reserve a spare 10A on it. I design it for you to see if it is reasonable.
First of all, replace the socket that is suspected of leakage, see if the fault point is eliminated, and try it.
Look at the instructions of the electric cooker, the general household electrical is 220V, and the 230V power supply can be used.
12KW, 220V voltage, 10 square copper core wire, current carrying capacity within 70A, can be used for a long time.
First of all, you are a 3-phase power supply or 220 DC power supply, it should be 380, first calculate the current 35, so that you choose a switch larger than this to choose a switch of 80A, and then according to the switch to choose the cable, choose the copper core 25 cable, that is, 3 * 25 + 1 * 16. There is also a possibility that the utilization rate of all your electrical appliances is not used at the same time, if not, multiply by a coefficient and calculate 35*, so that you choose the switch on the line of 63A, and the cable of the switch is 16 copper core, 3 * 16 + 1 * 10. >>>More
200 kilowatts is calculated as his maximum current of 500A, which requires 240 square meters of aluminum wire or 185 square meters of copper wire.