-
Anonymous users2024-01-24Adjust the float upwards to increase the water level of the tank, and the more water will rush up.
-
Anonymous users2024-01-231: The water level of the water tank is not high, adjust the height of the float 2: the switch is not in place, adjust the top bar 3: there are debris at the outlet of the water tank, clean the water outlet.
-
Anonymous users2024-01-22Raise the position or check if the outlet is blocked.
-
Anonymous users2024-01-21The toilet flush is weak, just turn on this small switch of the water tank, and the flushing problem will be solved immediately.
-
Anonymous users2024-01-20I don't know what the tank looks like.
According to the past few days on the Internet many checks, did not find a reliable way, at first thought that the pipe was blocked, and then knew that the sealing ring leaked, so there is no force in the water, here is a simple way to share with friends who need: "Close the water valve, that is, the water pipe that supplies water to the toilet, turn off the toilet to cut off the water, and then press the flush button of the toilet, let the toilet empty water flush once, and the toilet can generally return to normal" If the above methods are useless, you can only report for repair.
On the control panel of the smart toilet, there is a function to adjust the flush pressure. Generally, there are three gears, press +- to adjust.
See if the filter is clogged.
Solution: Close the valve on the hose connecting to the water inlet of the tank. Flush the toilet again and drain the remaining water from the tank. >>>More
If the middle of the tank lid is a button switch, use a tool to clamp the outside of the button switch, turn counterclockwise, remove the button, the tank lid can be opened, and if the tank lid can be lifted.
Try turning off the tap water, draining the water, letting the air in, and then turning on the tap water.