The distance between the toilet and the wall is less, so is it good to install a shifter

Before the toilet is installed, it is necessary to reserve the space on both sides of the toilet to ensure that people can do it normally on the toilet without feeling that the space is too small and too crowded; >>>More

The toilet shifter is usually installed by lowering the plane of the original sewer pipe to make up for the installation height of the shifter (about 6 cm), so that the toilet is still installed at the height of the ground, if it is higher than the ground, it is usually used to make the plane with the height of the shifter, and then install the toilet at the height of the bottom of the toilet and its squatting range.

It is installed between the outlet hole under the toilet bowl and the drain hole on the ground, so there must be a certain space for this shift, which is generally about 8CM in height. If the bricks are pasted, the bricks must be knocked or the ground must be raised. in order to install perfectly.

Yes, one of the drawbacks of using a shifter is that it is easy to cause clogging by having a corner. But don't worry too much, you can't install it directly and you can only use a shifter, otherwise the loss of re-opening and reinstalling the pipe is too great.

Any type can be installed, but the shifter will definitely cause unfavorable sewerage, and if it is blocked, it is not easy to dredge.