-
Anonymous users2024-01-23It depends on what kind of lamp it is, and the general ceiling lamp can be rotated directly and slowly to remove the outer shell! Hope it can help you, good luck and hope to adopt! If you have more questions, you can click on ID to consult.
How to change the ceiling lamp - replacement steps.
1. It can be used to disassemble the integrated ceiling plate by using its suction cup; >>>More
Generally, the outer glass cover will have a snap, and you don't need to use too much force to remove it, and then replace the bulb or tube. >>>More
Break the circlip on the back and install it.
This light is not LED, just change the tube. The principle of installing the aluminum gusset is to use the triangular keel to clamp the gusset, insert it with a blade from the seam of the gusset next to it, and take a piece of the gusset down with a little force under the gentle stay, the lamp is generally placed on the top of the lighting module, look at the clip card, take the card to move to the place where the gusset is taken, you can take down the broken lamp, it should be four feet like a needle, you can take it off if you pull it out, and you can take it off when you get this bad one to the hardware store than to buy one back and replace it. Don't worry about breaking the gusset, it's aluminum, it's not easy to break, just replace it and stick the gusset back. >>>More
The gusset of the integrated ceiling is copied in the bai keel, and if there is a suction cup, it can be sucked out in the middle of the gusset. >>>More