How to remedy the leakage of the cast in place balcony

Updated on Balcony 2024-05-21
2 answers
  1. Anonymous users2024-01-24

    There is no need to do this, just do a layer of waterproofing, and do it again to lay steel bars and do it, a waste of money! More information, better suggestions, free concrete waterproof leakage repair technical consultation, free of charge to avoid today's repair, tomorrow's leakage, every year repair, every year leakage trouble.

  2. Anonymous users2024-01-23

    It is best to use waterproof glue. Avoid causing trouble by leaking again.

    Mix the cement directly in proportion (there are instructions for use or consult the seller when purchasing) directly into the cement. You might as well use more and use it all at once. It is best to use and stir freshly.

    When buying a water repellent agent, consult the seller. I will introduce you to some of them for your own use. But I'm going to have to be pretty much the same.

Related questions
2 answers2024-05-21

First find the leakage point, seal it with the plugging spirit, and then smooth it with cement mortar, the open-air balcony should be paved with floor tiles, if it is a brick joint, and then decorate it with grout.

1 answers2024-05-21

It is absolutely not legal for the balcony to be extended. What is balcony expansion refers to the fact that the wall of any balcony cannot be removed, including the "interior wall". Interior walls refer to the walls on both sides of the floor-to-ceiling windows, which cannot be demolished. >>>More

1 answers2024-05-21

1. Generally, the whitewashed ones will give you latex paint! (Not in the long term). >>>More

1 answers2024-05-21

Just look for it along the dripping spot. Small points can be done on their own. Add cement with a waterproofing agent.

3 answers2024-05-21

If water seepage occurs on the balcony, this problem is the most difficult to solve, because the insulation is not enough, the condensation phenomenon is like sweating, and there will be large and uniform water droplets on the wall, which are condensed from the indoor air, not the water from the outside. If the wall is too cold, the water vapor in the indoor air will condense on the cold surface, causing a "sweating" phenomenon. It is not easy to solve, and it is often ventilated to prevent damp hair and mold.