-
Anonymous users2024-01-231. Generally, the whitewashed ones will give you latex paint! (Not in the long term).
2. Withdraw the wall skin, retreat to the blank cement, and hang a layer of tile adhesive on the wall, preferably type 2 and type 3. Tile it up.
This situation is mostly due to the temperature difference stress of the chimney that leads to the separation of tile bonding, and the remedy is generally to remove and re-pave. It is best to use high-temperature resistant mortar for secondary paving, otherwise there will be hollowing. I hope my answer can help you.
There is no problem, you can put tiles at any time - no matter how long you live in the old house, you can paste it at any time!
This depends on the situation of your original infrastructure, some developers directly spray real stone paint, and some are original cast-in-place walls. If your house is already painted with real stone paint and matches your color style, then you don't need to put tiles anymore. If it is an original cast-in-place wall, it is recommended to put tiles to prevent moisture, moisture and moisture. >>>More
First find the leakage point, seal it with the plugging spirit, and then smooth it with cement mortar, the open-air balcony should be paved with floor tiles, if it is a brick joint, and then decorate it with grout.
1. There is no floor drain in the kitchen, as long as a three-way interface is installed on the drain of the vegetable washing basin, one end leads to the sewer pipe, one end leads to the drain of the vegetable washing basin, and one end is connected to the floor drain joint. Of course, all this should be considered when decorating the kitchen at home, if it is on the basis of the "existing" according to this method to add the pipe tee and floor drain, it will definitely not be good. >>>More