-
Isn't it that you didn't install it well, the most basic flat quality requirements I think they won't make mistakes, see if the rod below is not in the right position.
-
1. How to adjust the toilet button screw.
1. Open the lid on the toilet.
2. After the lid is opened, you will see two black columns, which are the toilet button screws, which can be adjusted to control the strength of the toilet button.
3. When the water level is higher than the overflow pipe, the position of the float on the left side can be adjusted, and the screw can be adjusted by rotating the white rod in the circle.
-
Generally, the plastic screw is adjusted first, and if it is still long, it can be cut or shortened.
-
It can be trimmed to the most suitable length with a knife, and a little bit can be cut off with a knife.
-
The screw is generally plastic, and it is easier to cut the blade by grilling it over a fire.
The toilet outlet button is a wearing part, and it is generally necessary to replace it with a new one after a few years of use, and the toilet bowl with a higher price will be used for a longer time, and the lower price will be replaced in 2-3 years. You can buy toilet sewer accessories at the decoration material store, but sometimes they are sold in sets, you can buy a set of sewer accessories, all replace them with new ones, and the price is not high, you can buy it for dozens of yuan. >>>More
The float is broken, just replace it.
It's the same with my family, and when you press it, it doesn't move, and you lift the lid up, and the spring inside pulls it up, and then you close the cover.
Try a few more presses, maybe you can come up.
Lift the entire lid on top of the toilet bowl and the structure inside will help the button pop up. >>>More
If the water level of the water tank is too high and cause overflow, you can lower the water level.