How to identify the internal quality of solid wood furniture

When buying solid wood furniture, you must not only learn to identify the material of the furniture, but also learn to check whether the quality of the furniture is up to standard. The method is to carefully inspect the inside and outside, edges and corners of the furniture to see if there are insect eyes, cracks, and knots.

Moth-eaten. The eye of the insect is not visible at a glance, and the panels of the furniture need to be carefully examined. Insect damage can cause the inside of the wood to rot, resulting in substandard load-bearing capacity of furniture, so no matter how good the color and texture are, wood with insect eyes cannot be used to make furniture.

> cracking. If the moisture content of the wood changes too quickly, it will cause the wood to crack. Once cracks are found, the structural strength of the furniture will be affected, and it will also affect the aesthetics.

> joint scars. There will be living joints, dead joints, and rotten joints on solid wood boards. The wood structure of the joints is closely connected with the surrounding wood tissue, and there will be no cracks that affect the quality of the furniture.

However, the dead knots and rotten knots are separated from the surrounding wood tissue, resulting in insufficient load-bearing capacity of the boards, so the boards with dead knots and rotten knots cannot be used to make furniture.

> solid wood furniture market is mixed, and the phenomenon of shoddy is not uncommon. And solid wood furniture is generally slightly expensive, so when buying solid wood furniture, it is best to choose a well-known shopping mall and regular brand like the Louvre with a good reputation and guarantee, which can be guaranteed in terms of quality and service.

How to identify the internal quality of solid wood furniture

Materials are the material basis of furniture, and solid wood furniture is made of various materials through a series of technical processing, not only wood. Therefore, in addition to the basic requirements of function, beauty and craftsmanship, furniture design is also closely related to materials. So when we buy solid wood furniture, how to identify the quality of the interior of the furniture?

Below we will teach you the method of identifying the internal quality of solid wood furniture, I hope it can be helpful to you.

Methods for identifying the internal quality of solid wood furniture:

1. Observe the quality of wood: Open the furniture cabinet doors and drawers to observe whether the wood is dry, white, and whether the texture is tight and delicate; Inferior materials such as inferior wood or yellow heart wood are not only yellow-brown in color, but also very soft in wood.

2. Observe whether there are defects in the wood The main stress part of the furniture is framed, and the load-bearing horizontal strip near the ground between the columns should not have large knots, cracks and cracks.

3. Observe the strength of the plate surface The strength of the board surface can be pressed with fingers to feel the fastness of the board surface, and the surface material should be fixed with a tic-tac-toe skeleton, if the skeleton is sparse, the surface will feel empty and unreal, and the panel trembles greatly. The bottom of the drawer can be pressed by hand to test the strength.

4. The skirt feet should be protected Furniture decorated with various veneer materials should have protective skirts close to the ground, otherwise a layer of 3 mm thick Polyflor board may be kicked by the toes.

5. Accurate size and correct modeling Inspect whether there is a high and thick drawer or the door frame is tilted, whether there is a crooked tenon eye position or an eye hole that is too large, and the tenon is not strict and other parts caused by the level of craftsmanship.

6. Structural requirements for the main dimensions: The width of the supporting column of the modular furniture and the base column of the stool cabinet should not be less than 45 mm 50 mm, and the thickness should be 20 mm and 22 mm. The width of the horizontal bar around the cabinet should be 25 mm 30 mm, and the thickness should be 20 mm and 22 mm.

That's itHow to identify the internal quality of solid wood furniture All of it.