How to write a furniture mahogany scraping scheme

The scraping process is a pure manual operation in the modern mahogany furniture making process. Depending on the shape of the product, the method used is different, and the tools used are also different.

For square flat panels, the scraping and grinding technician operation method:

Since the surface of freshly assembled furniture looks rough, scraping is an important step in the mahogany furniture making process. The quality of polishing directly affects consumers' first impression of mahogany furniture. The scraping process of an arhat bed requires 3 workers to polish it for at least 20 days, not including the part around the bed.

It can be seen that to achieve the smoothness and roundness of the surface of the furniture, it is a very time-consuming and labor-intensive link.

Many surfaces of furniture need to be polished by hand, generally scraped with a scraper first, and then sanded with finer and finer sandpaper for many times, until the traces of coarser sandpaper are polished off. The scraped semi-finished furniture has smooth lines, a flat surface without a sense of waves, a smooth and clear texture, and a smooth and comfortable feel.

Scraping - Method steps.

1 First of all, the scraping master receives the scraping product from the scraping supervisor. (Nowadays, in the mahogany factory, scraping and grinding are piece-rated.) Check whether the product to be scraped meets the requirements.

2. Put the square product or material in the flat grinding area, and the scraper grinder uses a flat grinder to smooth the uneven parts of the plane square and some plane squares, and then grind it uniformly.

3. The scraper will put the product in a bright and bright place, first use a blow gun to blow the surface of the product clean, and check whether there are cracks on the surface of the product, rotten spots, etc. At this point, this problem usually doesn't arise.

4 Scraping master, use a large scraper to follow the direction of the wood grain, scrape the flat grinding mark and abrasive belt mark clean, and then scrape flat, and finally cross the waves, horizontal and vertical, until it is smooth and smooth to see with your eyes and touch with your hands, and there are no waves.