How high is the wall waterproofing treatment of the bathroom generally necessary, and is it the same

Bathroom waterproofing, it is recommended to do it three times, the first use of Yijia waterproof coating, that is, the above questioner said, the use of non-woven materials coated on top. The second is mortar cement, such as the famous brand Laoyar produced in Shenyang. Mix cement to do waterproofing. >>>More

MAKE 1800MM FOR THE SHOWER WALL, AND 1200MM FOR THE OTHER WALLS.

The bathroom is waterproof, and the surrounding walls need to be painted at a height of not less than 30 cm; If there is a shower, the height of the waterproof paint applied on the installation of the shower faucet and the adjacent wall should not be less than 150 cm, preferably about 180 cm. >>>More

It is a very important process to do toilet waterproofing, and waterproof construction should be coated with waterproof waterproof The performance of waterproof materials should meet the provisions of the current national standards, and there should be a product qualification certificate; The surface of the base should be smooth, and there should be no defects such as hollowing, sanding, cracking, etc., and the moisture content of the base should meet the construction requirements of waterproof materials; THE WATERPROOF LAYER SHOULD EXTEND FROM THE GROUND TO THE WALL, 250MM HIGHER THAN THE GROUND, AND THE HEIGHT OF THE WATERPROOF LAYER ON THE WALL OF THE BATHROOM NEAR THE SHOWER HEAD SHALL NOT BE LESS THAN 1800MM; THE WATERPROOF LAYER OF THE COATING FILM IS EVENLY BRUSHED, THE GENERAL THICKNESS SHALL NOT BE LESS THAN 1 5MM, THE WATERPROOF SURFACE OF THE COATING FILM IS NOT BLISTERING, NOT FLOWING, SMOOTH AND CONVEX, AND THE JOINTS OF PIPE FITTINGS, SANITARY WARE FEET, FLOOR DRAINS, AND DRAINAGE OUTLETS ARE TIGHT, AND THE END IS SMOOTH AND DOES NOT LEAK After the waterproof project is completed, it is necessary to do a 24-hour water storage experiment. >>>More

How high the bathroom is tiled mainly depends on how high your ceiling is. The height of the tile is generally about 80mm higher than that of the ceiling, because in this way the ceiling can be better installed, and the tile will not be damaged when the ceiling is drilled. The tiles of the bathroom are generally pasted, in fact, the distance from the ceiling to the ground is generally pasted, because the bathroom is damp, and the tiles will be pasted to the top.