The toilet inlet pipe switch in the toilet is broken, how can I remove it Twist it for a long time a

Updated on Toilets 2024-05-21
2 answers
  1. Anonymous users2024-01-24

    There is no mechanism, you are talking about the broken inlet pipe of the water tank? Or is the 5 pieces of gold in the tank broken?

    1. Put the water in the tank out first, it is difficult for you to remove it if there is water pressure.

    2. There is a metal or plastic clamp at the water inlet of the water tank and clamped with a wrench, and there is also one in the water tank, which can be screwed with a wrench, pay attention to the strength, do not use brute force.

    3. There is also no place for a wrench in the water tank. You hold the bottom of the hardware inside and screw the metal or plastic clamp on the outside of the tank inlet.

    4. There is another possibility, that is, when installing the water tank, the glue (glass glue or PVC glue) used by the plumber for you is smeared on the thread buckle of the accessories, and it is difficult for you to screw. If it's a plastic fitting, it's almost impossible to twist. If it's a metal fitting, you can still twist it when you take it slowly.

    Finally, big brother, you can pay attention to the direction of the twist, you can't be awkward in the wrong direction. Generally speaking, the counterclockwise below is tight and clockwise is loose. The bottom of the tank is loose counterclockwise, and tight clockwise (depending on the direction of the wire mouth).

  2. Anonymous users2024-01-23

    Is it the inlet of the tank or the water pipe leading to the tank?

Related questions
How to change the switch of the toilet inlet pipe when it is broken?
5 answers2024-05-21

1. First of all, remove the upper lid of the toilet tank. >>>More

Leaking toilet inlet pipe
3 answers2024-05-21

According to the reason, there is no need to dismantle the toilet, the worst case is to remove the water tank, remove the water tank to replace the internal part of the broken accessories, and the worst case is to replace all the accessories in the water tank, which should not be too expensive, and work for one or two hours.

How to change the toilet against the wall into the water pipe
3 answers2024-05-21

Close the triangle valve, turn the hexagonal nut of the water inlet pipe counterclockwise to remove it, and tighten it clockwise when replacing it.

Will the water inlet pipe of the washing machine be connected to the water inlet pipe of the smart t
2 answers2024-05-21

If the equipment is plugged in, the water pipe is electrified, then focus on detecting the electrical appliance to see where it leaks. >>>More

Leaking toilet inlet pipes
1 answers2024-05-21

This is a crack in the water pipe or a problem with the two joints, you can ask a professional maintenance person to deal with your own house, and you can find a property in the building.