-
Anonymous users2024-01-24First, if the toilet at home has a leaking water tank, you should first check to see if it is caused by the poor material of the water tank or the old internal parts of the water tank. Because there are many types of toilet brands on the market now, some small manufacturers produce a flush toilet of inferior materials in order to seek more benefits, which is often not visible on the surface, but it has not taken long for various problems to occur. Of course, we do not rule out the problem of natural aging and deterioration of the toilet at home after being used for too long.
So at this time, you can disassemble the toilet tank and check whether the parts are in good condition and whether it is a problem of aging material. If the parts are broken, you can buy a new one and replace it, if not, it is recommended that you replace the entire water tank to avoid more serious consequences.
Second, the problem of a leaking toilet tank may also be due to a problem with the sewer pipe underneath. The solution to the problem of the sewer pipe is to carefully check whether the interface between the toilet and the sewer pipe is loose, or whether the sewer pipe is rotten, if the sewer pipe is rotten, you need to replace the sewer pipe again, if it is not connected well and there is a leakage, you need to re-use some wire or other things or go outside to buy some materials that can fix it, and fix the toilet and sewer pipe interface. Thirdly, there may be a problem with the drain valve.
The drain valve of the toilet is mainly in charge of the water of the toilet tank, generally speaking, it may be because of the problem with the drain valve, or it may be that the installation hole is cracked and deformed, etc., if the above two reasons are ruled out, it is because of the problem of the drain valve that causes this phenomenon, it is recommended that you can ask professional maintenance personnel to come to the door for maintenance, in order to ensure our normal use.
The main reason for the leakage of the toilet is that the valve is not closed tightly or broken, if it is not broken, it is not closed tightly, you can check it, it is possible that the water has accumulated over time and the water is not closed strictly, as long as the water tank is thoroughly cleaned, if it is not good, see if the drawing of the valve is loose, as long as it is not broken, you can repair it yourself.
According to your description, there should be two problems: First, the floor drain at the washing machine is not smooth, please check the property management. Because after you drain the water, there is a backwater leak in the middle and inside.
d a volunteer translator,
There are 3 scenarios;
The import and export are loose and tight. >>>More
There are three scenarios for a leaky toilet:
1. The water leakage at the water inlet of the water tank, the water leaks to the toilet, the solution is to remove it to see if the rubber pad has been damaged, if no harm is found, you can try to change the direction of the rubber pad to install it. If it doesn't work, then you can only replace the rubber pad; >>>More