The flush toilet can t be pumped, how to solve it?

The toilet cannot be pumped.

1.The toilet tank is not at the same level.

2.It's that the drain and drain are inconsistent when installing! This problem happens a lot during installation! The sewer and drain pipes are only halfway in contact.

3.It's that the toilet is really blocked, but it's not big.

Then replace it with a new flush button, and remember to adjust the screw rod to the right size. 3.Then plug in all the pipes and put the toilet lid back on.

4.Press the flush button to test it to see if it can be flushed, and if it can be flushed, you can just hear the sound of water filling in the toilet. 1. Open the main valve of the toilet, that is, the angle valve, and see if there is no water.

2. Open the lid of the water tank, to see what causes the water tank not to water, first see whether the piston can be plugged, if it can't be plugged, the water tank will leak, the switch is not enough, so the water tank accessories of the toilet are divided into three parts. The drain valve is directly below the button, and the second is the water inlet valve, which is the part of the hose that connects to the outside of the water tank, which is generally next to the drain valve. The third part is the button, which is divided into a full row of buttons and a half row of buttons.

3. Check whether the flush button has reached the water inlet valve, and if it does, readjust the position of the water valve. It is also important to see if the float or float of the inlet valve can move up and down freely. If you get stuck, the water won't get in.

Generally, there are adjustable crosseyes on the pontoons, and you can twist them in a clockwise direction to see.

Hope it helps, dear

If the rubber kick is broken, buy a new one, and the wire is generally ineffective, because there is a backwater bend, so the straight wire can't reach the blockage at all. Just waiting for someone else's idea can't fix your toilet, and a rubber kick won't cost a few bucks!

If the rubber kick can't unclog either, find someone who specializes in unclogging sewers to solve it, because there's nothing you can do about it! There are also organic solvents that generally cannot dissolve plastic bags, let alone in the presence of water!

If you can't dredge with a kick, is there a problem with your use, dredging is not by pressure, but by the negative pressure formed by the pullback, as well as the vibration back and forth, first fill the toilet with more water, and then use the kick to do it, a few more times, because if you can't dredge, you can only spend money to let a professional dredge person do it!!

There are several reasons for the toilet toilet pumping, first, the water level of the water tank is set low, if it is a float tank, the float can be adjusted high, it is very simple, if it is a non-float tank, lift the lid of the water tank, you will find that there are two bolts on the lid that can adjust the length, the way is to screw the bolt long, the water level will come up, and the pumping force will become larger: however, some people's water level is adjusted to the highest pumping force is not enough, this situation is caused by the blockage of the backwater bay, at this time, you can use the leather pump to pump a few times, it will be significantly improved, What if the blockage is severe and the skin pump doesn't work? Generally, we first think of the dredging machine, however, the ceramic of the toilet with the dredging machine may be worn, very unsightly, there is a way, not to destroy the ceramic, but also to achieve a very good dredging effect, the method is to freeze a basin of ice in the refrigerator, knock it into pieces of different sizes, pour it into the toilet, and poke it hard with a toilet brush, not afraid of blocking the toilet hole, the more blocked, the better, until all the ice is stuffed into the toilet hole, and the ice will take away all the old dirt hanging in the backwater bay, After a while, the ice naturally dissolves and the clogged toilet is opened without dredging, and if the toilet is blocked, you can also use this method, which does not hurt the ceramics, and the dredged toilet is particularly clean.

You might as well try it, my method is easy to use, don't forget to like it.

The main reason why the toilet does not drain.

1. The water in the toilet is broken or the parts in the toilet are falling off.

2. The appropriateness of toilet pipe design is not optimal.

3. Paper scraps or other blockages block it.

The solution to the toilet not flushing.

Method 1: In fact, it is also simple, and the situation of less water from the faucet is a problem. Even the better toilet bowl has a filter inside, and the filter is blocked by too much limescale for a long time, so that the tap water can't come in. As long as you can remove the filter and clean it, you can do it.

2. Close the valve on the hose connecting the water tank to the water inlet, otherwise the operation will spray water after a while. Flush the toilet again and drain the remaining water from the tank.

Ask a professional toilet repairer to take care of it.