There is no pressure in the flush toilet, and the toilet does not go down after flushing, and all th

Updated on Toilet 2024-05-21
4 answers
  1. Anonymous users2024-01-24

    There are two problems you mentioned: 1. The water leakage at the back indicates that the toilet drain in your home is not aligned with the nozzle of the sewer pipe, and it is deviated, or the oil lime used to seal it has dried up, and the flushing water for a long time has fallen off and needs to be readjusted. 2. If the toilet does not drain, it means that the drain S bend of the toilet body is blocked, and it is good to dredge it.

    These problems can be solved by yourself. If not, just hire a plumber to do it.

  2. Anonymous users2024-01-23

    The toilet is blocked It's not that there is no pressure, find a master who dredges the pipes or go to the building materials market to buy a pipe unclogging.

  3. Anonymous users2024-01-22

    There are several reasons for the toilet toilet pumping, first, the water level of the water tank is set low, if it is a float tank, the float can be adjusted high, it is very simple, if it is a non-float tank, lift the lid of the water tank, you will find that there are two bolts on the lid that can adjust the length, the way is to screw the bolt long, the water level will come up, and the pumping force will become larger: however, some people's water level is adjusted to the highest pumping force is not enough, this situation is caused by the blockage of the backwater bay, at this time, you can use the leather pump to pump a few times, it will be significantly improved, What if the blockage is severe and the skin pump doesn't work? Generally, we first think of the dredging machine, however, the ceramic of the toilet with the dredging machine may be worn, very unsightly, there is a way, not to destroy the ceramic, but also to achieve a very good dredging effect, the method is to freeze a basin of ice in the refrigerator, knock it into pieces of different sizes, pour it into the toilet, and poke it hard with a toilet brush, not afraid of blocking the toilet hole, the more blocked, the better, until all the ice is stuffed into the toilet hole, and the ice will take away all the old dirt hanging in the backwater bay, After a while, the ice naturally dissolves and the clogged toilet is opened without dredging, and if the toilet is blocked, you can also use this method, which does not hurt the ceramics, and the dredged toilet is particularly clean.

    You might as well try it, my method is easy to use, don't forget to like it.

  4. Anonymous users2024-01-21

    Obviously, the toilet is blocked, use the toilet pump to poke a few more times, if it doesn't work again, poke it down with a wire, poke it a few more times, the wire is not too hard.

Related questions
11 answers2024-05-21

1. You can increase the amount of water, such as putting bottles in the water tank. >>>More

1 answers2024-05-21

The gravity of the water, the waterway inside the toilet bowl is designed with the principle of fluid mechanics.

1 answers2024-05-21

Maybe the toilet has been used for a long time, and the old-fashioned toilet drains are relatively small, since the master said that it is not blocked, then a few hundred dollars for a new one, so as not to always worry about it.

3 answers2024-05-21

There are also in-line and S-bend, but the best one is the siphon type, which flushes cleanly.

3 answers2024-05-21

How to deal with the broken flush valve of the flush toilet: Grab the total drain and rotate counterclockwise or there are two small plastic cards in the shape of 7 on the left and right of the bottom of the drain, and grab the end of the figure 7 and pull it up with your hand. If you can't repair it yourself, ask a professional master to repair it, ask a professional master to repair it. >>>More