-
Anonymous users2024-01-231. Area: Refinement to each plate is to completely separate the structure of the wardrobe, calculate the area and unit price of the plates, hardware, partitions, backplates and related accessories, and finally add them to get the final total price. At present, the stronger brands in the market mostly use area to denominate.
2. Projection area: confirm the configuration before placing an order, the projection area is priced according to the projection area of the front of the wardrobe (that is, the length and height of the wardrobe), and the depth (width) is generally the standard size of 60 cm, excluding the cabinet door. According to the customer's living needs, the folding area, hanging short clothing area, hanging long clothing area, clothing pole and all the plates are designed, and the price will be increased if the standard configuration is exceeded.
According to the different location or function of the wardrobe, you can determine the time of door-to-door re-ruler and accurate measurement, if your wardrobe is leaning against the wall or do not plan to move the position in the future, such as the cloakroom, after the ground cement leveling can ask the manufacturer to measure; If your wardrobe is one side against the wall or to move the position in the future, such as bookcases, shoe cabinets, TV cabinets, etc., it is best to ask the manufacturer to measure after the floor or floor tiles are paved, however, please rest assured, the general complex selection and confirmation of the cabinet pattern of the steps have been completed, there will be no delay in time, the general manufacturer's custom cycle is about 10 days, and it can be used directly after installation, it will not delay everyone's check-in time.
Furniture customization needs to be timely, so that the furniture company can measure it after finding the floor level in your home. >>>More
Measured in two parts. The first time is when the water circuit is transformed, the initial test is carried out to determine the cabinet type and cabinet distribution, so as to avoid blocking important points; The second time is that the wall base is treated, the premise is to determine the height of the finished surface of the ground, and measure it carefully to ensure that the seams are tightly fitted. This content is provided by Renovation CBD.
If you want to save money, you can customize furniture made of plates, but formaldehyde may exceed the standard; >>>More
Look at yourself, there are two ways to install custom furniture, one is to install it on the ground, only need the ground and wall leveling, so that you can save a little floor floor tiles, wall to save some putty, latex paint. The advantage is that it is easy to close, and the gap between the bottom and the wall is easy to close. >>>More