-
Anonymous users2024-01-23First of all, the elevation line should be popped up on the wall, the pressure line should be fixed at both ends of the wall, and the wall should be fixed firmly with cement nails.
The plate is cut according to the actual size of the ceiling, the plate is inserted into the bead, the tongue and groove of the strip is outward, and after the installation is straightened, it is fixed with a nail, and then the second plate is inserted.
The last plate should be cut according to the actual size, cut with a sharp knife, use a steel ruler to press the elastic line to cut, and insert it into the upper plate cut by bending it slightly, and seal the strip on both sides after installation.
It depends on what material you use for the base layer, and the thin steel sheet is generally still used for the wood base layer. Then add yin and yang corner lines.
Woodworking ceilings? Woodworking board is only suitable for modeling, and gypsum board must be pasted on it, otherwise the putty is not easy to wipe.
1. Clean up the base layer.
2. The density of light steel keel frame or 3*4 wooden keel frame (for fire treatment) is not more than 600*600 >>>More
Introduction: The main advantages of calcium silicate board ceiling are light weight, waterproof, sound absorption, and simple construction. >>>More
The 38 and 50 main keels should be arranged parallel to the direction of the luminaires to enhance the lateral stability of the large keel and the integrity of the boom.