-
Anonymous users2024-01-23It is likely that the screws that control the float are too tight, so that the float can not rise and fall with the water level freely, so it can not drive the water valve switch to work normally.
-
Anonymous users2024-01-22There is a spring switch inside to let the water out.
The float is adjusted too high, that is, the water inlet switch is adjusted too high, twist the cross wire, counterclockwise, if it doesn't work, it is recommended to change the water inlet valve to see.
The toilet has been on the water, the float can float, that is, the water does not stop, there are many reasons, the first point may be that the water tank fell into the debris to cushion the bottom valve of the float has been leaking, although the ball floated, but has been on the water. Another point is that the float in the tank is stuck, the valve is not controlled, check it.
This is because the blood is not circulating, and if you squat down, the blood will not flow smoothly, resulting in a state of hypoxia in the brain, which is why it will cause dizziness.
Due to the different height of the water tank of each manufacturer, the purpose of adjustment is to achieve adaptation.
There are two situations: one is that the water level of the water tank is higher than the overflow port, and the inlet valve is not only water, but the inlet valve is generally faulty or adjusted too high; The second is that the water level is very low, and the water is leaking from the drain outlet, which is generally a drain valve problem. According to the specific situation, see if the fault can be eliminated. >>>More