-
Anonymous users2024-01-23I often encounter this problem when installing a range hood, and it is enough to add a stainless steel frame to the window, but the light is not so sufficient after installation.
-
Anonymous users2024-01-22The rear can be technical and the four are empty, and there is no area why the meeting point.
-
Anonymous users2024-01-21Ask the installer, he will measure the position for you.
Reserve the hood position.
1. The range hood should be installed directly above the center point of the gas cooker, and the distance between the bottom plane and the gas cooker should be within the range of 650mm-750mm. >>>More
Yes, but you can't use the public flue anymore. A hood hole needs to be cut in the north wall. It is used for exhaust air.
Hello, the range hood should be installed directly above the center point of the gas cooker, and the distance between its bottom plane and the gas cooker should be within the range of 650mm-750mm. Try not to install the range hood near doors and windows and other places with strong air convection, so as not to affect the effect of range hood. The air outlet pipe should not be too long, preferably not more than 2 meters, and try to minimize bending, avoid multiple 90-degree bending, otherwise it will affect the effect of oil smoke. >>>More
Then look at the distance between your upper cabinet and the lower cabinet, if there is about 750 to 800, it is still OK, and then buy a range hood according to this height, use the side suction type, and directly make a smoke exhaust hole of the range hood in the cabinet, and it is OK.
No, take Hefei as an example:
According to the "Interim Measures for the Management of Building Decoration and Decoration in Hefei City". >>>More