-
Anonymous users2024-01-23No, you have to open a single flue, go directly through the wall to drill holes, stretch the chimney out of the wall, and take other flues, in case the smoke does not go well, it is easy to cause gas poisoning.
-
Anonymous users2024-01-22The gas water heater smoke exhaust pipe can not go through the public flue, and the general kitchen will be equipped with a public flue, which is specially used for the range hood to exhaust the fume, but the gas water heater smoke exhaust pipe can not go through the public flue. The exhaust gas discharged from the gas water heater is flammable due to the high temperature, which is easy to cause fire, and the smoke pipe of the gas water heater must use a separate flue for safety. In addition, the oil smoke contains trace amounts of oil molecules, which are easy to adhere to the inner and outer walls of the smoke exhaust pipe of the natural gas water heater, and adsorb dust particles, which not only causes difficulty in smoke exhaust, but also will be stained with oil scale inside the water heater after a long time, making the water heater prone to failure.
-
Anonymous users2024-01-21Discharge to the outdoors, but not to use the public flue.
Natural gas water heaters cannot be installed in restrooms. Because the gas water heater needs to consume a lot of oxygen during use, and the bathroom is a closed space, if the lack of oxygen in the bathroom is caused, a large amount of carbon monoxide, carbon dioxide and other toxic gases will be produced, which is easy to cause hypoxia and fainting accidents during the bathing process.
The kitchen and toilet faucets suddenly don't have hot water? Excuse me: Can't get out of the cold water? If there is no cold or hot water, then it must be blocked, if cold water can be produced, it means that the pipeline is too long and cannot be insulated, and the pipeline needs to increase the insulation layer. You need to be clear.
It should be that the flow sensor inside is not sensitive. >>>More
The elbow of the outlet of the gas meter can be moved at least 10 cm forward or right, or the socket can be moved to the upper left or upper right of the water heater.
The scaling of the water channel caused by the scaling of the water channel causes the blockage of the hot water pipeline, resulting in a large back pressure of the water channel flow, the longer the pipeline, the greater the back pressure, to a certain extent, the water heater water-gas linkage device will think that the hot water faucet has been closed and close the gas channel, there is no gas, of course, it cannot be ignited. >>>More