-
Anonymous users2024-01-23If the water pressure of the hot water is significantly lower than that of the cold water, then it may be that the hot water outlet is blocked;
If they are all the same size, then it is possible that the pipe is connected incorrectly.
-
Anonymous users2024-01-22The bathroom is far away, the water pressure is small, and the ignition is not started.
-
Anonymous users2024-01-21Hello answer, I have seen your question, and I am sorting out the answer, please wait for a while Dear, if you only hear the ignition sound when ignition, there is no solenoid valve "click" magnetic suction sound, it may be that the solenoid valve is damaged or aging, the solenoid valve is aging, it will be uncontrollable, it can be sucked at the beginning of the ignition, and it can catch fire, but then it is closed and extinguished; It may also be that the gas pressure is too high or too low, and the output pressure of the cylinder pressure reducing valve will be too high or too low for the water heater using canned gas. It could also be that the solenoid valve is dirty. The solenoid valve should not be caused by over-gas.
Hope you help.
If you have any questions, please continue to consult me.
Dear, can you give a thumbs up.
-
Anonymous users2024-01-20You look at whether your heater is electric or electronic, and check if it is powered and gas.
-
Anonymous users2024-01-19If the water pressure is not enough, add a booster pump.
This situation is obviously not a problem with the water heater, but is caused by the use of more hot water in the bathroom and the accumulation of dirt in the hot water pipe. >>>More
This problem is estimated to be that there is a foreign object blocked in the faucet or water pipe in your kitchen, and the water pressure is not big enough to ignite the fire, you can turn on the water in the bathroom and kitchen at the same time to see if the water flow is the same, if the water flow is the same, or not, then a professional maintenance master should come to see if the water heater is broken.
The pipeline is blocked, and the water flow cannot meet the basic requirements of the water heater. >>>More
First of all, you see whether the hot water pipe in your kitchen is the same as the hot water pipe of the water heater (whether it branches from above), if it is not connected, no hot water is certain, if it is connected and there is no hot water, there are two situations: one is that the hot water pipe may be blocked, and the other is that the mixing switch is broken.
There are several reasons for this, first of all, the pressure of your tap water is small, if the fire in the kitchen is close to the water heater, the pressure is less and slightly larger, and the pressure can barely be lit with hot water, and the pressure of the water pipe in the bathroom is far away from the water heater, and the pressure of the water pipe drops a little bit, and it cannot reach the pressure of the ignition of the gas water heater, so there is no hot water in the fire, if you want to enhance the pressure of the tap water, you can buy a small booster pump yourself.