Water seepage at the tiles on the toilet floor is still the same today when the inlet valve is turne

Updated on Toilets 2024-05-22
6 answers
  1. Anonymous users2024-01-24

    Water leakage is an annoyance, and only by re-modifying the suspicious points can it be thorough.

  2. Anonymous users2024-01-23

    Generally, roof leakage is a problem upstairs.

    Let's go upstairs first

  3. Anonymous users2024-01-22

    There is a problem with the quality of the pipeline or the original engineering quality, resulting in multiple leaks or water seepage at the same time. Inspect what you can see. If it is a short-term treatment, you can first close the water valve, dry the water pipe with a blowtorch, and then wrap the polyethylene plastic film around the leaking position, and then use the blowtorch to slightly bake the plastic film to melt and attach to the pipe to play a sealing role; If you think about it for a long time, updating it all is the best thing to do.

  4. Anonymous users2024-01-21

    Indicate that at least one water pipe is leaking, check and repair.

  5. Anonymous users2024-01-20

    Oh, and did you check the main pipe, and if the water meter was turning after you turned off the inlet valve?

  6. Anonymous users2024-01-19

    The waterproofing layer of the floor of the neighbor's bathroom and kitchen upstairs is not properly treated, so that as long as there is water on the floor of the upstairs shower or bathroom, it will leak down.

Related questions
10 answers2024-05-22

1. Confirm that the water parts inside the water tank are installed correctly and tightly. It can be closed with glass glue at the bottom of the water inlet and the junction of the water tank. The bottom of the flush part is also treated. >>>More

4 answers2024-05-22

Hello! What does it mean to turn off the water meter?

It should be that the water pipe is broken, and the water is under pressure, and it is difficult to seep out of the pipe without pressure, and it is not easy to break. Besides, if you turn off the water meter, it won't turn, and what tube to change depends on the situation of your kitchen. The open pipe is exposed, easy to maintain, and not beautiful. It's more annoying in the future, if you know the position of the line pipe, knock on the water pipe and then re-paste the tile is better, I think. What do you mean? >>>More

2 answers2024-05-22

Apply it without leaking water at the point where the sewer pipe wall and the ground come into contact!

1 answers2024-05-22

Many hotel toilets, bathtubs, basins, seafood pools, shower rooms, baseboards, and countertops always have annoying moldy edges, which not only affect the appearance, reduce the grade, but also affect hygiene. This is because these places are made of glass glue and the glass glue itself is suitable for organic matter, glass glue due to the moisture of the water, there will be a lot of mold and other microorganisms on the surface of the glass glue and between the crevices to grow, over time, the mold will be covered with the surface of the glass glue and turn black, at the same time, the mold will absorb more dirt and bacteria, so that the bathtub edge, the corner of the wall looks very dirty and disgusting, not only affect the appearance, but also feel unhygienic. It is also often complained by guests. >>>More

4 answers2024-05-22

There is a leaking water pipe or a leaking sewer pipe in the wall, more information, better suggestions, free professional technical consultation for concrete waterproof leakage repair, eliminating the need to repair today and leak tomorrow; Repair every year, the trouble of leaking every year.