When the bathroom is loaded with cabinets, the impact drill hits the wall halfway and flushes out, a

Updated on Bathroom 2024-05-22
2 answers
  1. Anonymous users2024-01-24

    Normally, the dust on the wall is broken and can't come out, and there are more inside, and it sprays out.

  2. Anonymous users2024-01-23

    In this case, I feel that it is very likely that you hit the flue, and it will be fine if you plug it!

Related questions
23 answers2024-05-22

There are two ways to deal with it. One is to disassemble the leaking part, replace it with a good tube, and then repair the wall. This method is more labor-intensive and costly, but the effect is better after processing. The second is to switch to open pipes. This method is quick to process, but takes up space and requires a lot of maintenance.

2 answers2024-05-22

The percussion drill can also be used to hit the tile wall, as long as the alloy drill bit is replaced, the percussion drill function can be adjusted to the electric hammer function, that is, the strength is small, and the diameter of the drill bit is limited to a maximum of 12MM

1 answers2024-05-22

How to play cabinets on the wall of the bathroom dry area, make cabinets on the wall of the bathroom dry area, you can go to the manufacturer to customize, you can also find your own carpentry to make it on site, the cabinet style is customized according to the needs, although it is a dry area, it is still a bathroom, close to the water source, and the wooden cabinet is easy to be deformed by moisture, so the cabinet material should be made of moisture-proof wood as much as possible, such as oak. Hope to adopt.

1 answers2024-05-22

You can hit the cabinet, do not touch the ground, to protect from moisture, hanging on the wall is best.

4 answers2024-05-22

You can or use a hammer to knock some small pits to enhance the adhesion of the contact surface.