I want to install a socket in the bathroom, and how to fix the open wire on the tile

Then, we wait for it to solidify and then we can wire When wiring, it is necessary to merge the wire eye from the original socket, connect the three wires to the new socket, and finally, after the wire is connected, you need to install the cover plate of the wire duct, so that the layout of the new circuit is completed. Of course, in the process of installation, you must pay attention to your own safety, and you must first make sure that the total power supply is cut off, and the above steps are carried out.

After the renovation of our home, especially the tiles on the wall, if we want to install a socket on the wall, how should we install it? We all know that it is easy to break the tiles by punching holes in the wall tiles, so this method is not very feasible. The following home miscellaneous altar will share with you a method of arranging a tile surface-mounted line.

The materials that need to be prepared for the exposed wiring of the bathroom tiles.

The layout method of the surface-mounted trunking line.

Other methods.

The above personal introduction to you is the use of PVC wire box and trunking, the layout of the surface-mounted line. In fact, you can also use stainless steel or aluminum trunking box to arrange, which will be more beautiful, but not as practical as PVC. Another point is that if we want to drill holes in the tiles, we must use a special hole opener for drilling, so that we can also install some other material trunking, which is also very useful, but I personally do not recommend this.

ConclusionAbout how to fix the open line pipe on the bathroom tile wall, the method recommended by me is to use glue to fix. I wonder if you have a better way? I hope my answer will be helpful to everyone!

If you have a better plan, you can also share it for us to exchange and learn together, thank you!

We all know that it is easy to break the tiles by taking dark lines and punching holes in the wall tiles, so this method is not very feasible. At this time, if you want to install a socket in the bathroom, it is best to walk the open line on the tile.

When installing the surface-mounted socket bottom box, the back is first covered with glue, and then pressed firmly onto the tile wall. The third step is to use the prepared adhesive tape, fix the installed wire box and wire groove on the wall, and wait for the structural adhesive to solidify. The fourth step is that after the structural gel has solidified, we can now carry out the wiring?

When wiring, the wire is paralleled from the original socket, and the three wires are connected to the new socket. The fifth step is to install the cover plate of the trunking. After we have completed the wiring, we install the trunking cover on the trunking, so that the layout of the new circuit is completed.

The line should be from top to bottom as much as possible, and fixed with a non-adhesive sticker or non-adhesive buckle. It is necessary to put a protective box on the socket away from the washing area. Avoid water and electricity in series, accidents occur.

It can be fixed with nails and that kind of paste artifact, and now there are tile fitting artifacts that can hang things.

If you want to walk the open line on the socket of the bathroom, you can use professional decoration, the nail looks beautiful, and when it is nailed to the tile, the tile will not crack.

It is necessary to use flameproof and waterproof pipe materials, fix it with clips, and try to avoid wetting the water, which is easy to cause leakage and cause harm to your life.

We all know that it is easy to break the tiles e5a48de588b6323131333532363134313032313635333133331373934 by walking dark lines and punching holes in the wall tiles, so this method is not very feasible. At this time, if you want to install a socket in the bathroom, it is best to walk the open line on the tile.

When installing the surface-mounted socket bottom box, the back is first covered with glue, and then pressed firmly onto the tile wall. The third step is to use the prepared adhesive tape, fix the installed wire box and wire groove on the wall, and wait for the structural adhesive to solidify. The fourth step is that after the structural gel has solidified, we can now carry out the wiring?

When wiring, the wire is paralleled from the original socket, and the three wires are connected to the new socket. The fifth step is to install the cover plate of the trunking. After we have completed the wiring, we install the trunking cover on the trunking, so that the layout of the new circuit is completed.

If you want to walk a topstitch on the tile, you can fix it with glue that sticks to the tile.

It can be fixed with U-shaped nails, which is very easy to use, but the topstitching is not very good-looking.

It is recommended that you fix it with a fixed plastic U-shaped head, and then use all-purpose adhesive to paste it.

Or fix the short circuit plate and put the wire directly on it.

Don't fix the bright line, go to the master to get the dark line yourself, so it's safe.

Some U-shaped fixing heads or tacks can be used to secure the topstitch.

Walk the bright line on the tiles, and you can let a professional master help you fix it.

You can buy a fixed buckle yourself, and now Taobao has a lot of artifacts.